Technical Specifications; Fcc Declaration Of Conformity; Class 1 Laser Product - Fujitsu DYNAMO 640SE User Manual

Technical Specifications
Disk capacity 128MB '+ 230MB ' 540MB_ '640MB
Disk format 90mm 3.5"MO
1.14MB/s {1.3-2.11MB/s! 2.3:3.9MB/s |2.3-:3.9MB/s
Rotational speed
non operaing
FCC Declaration of Conformity
Interface
| Drive
Power ' operating
requirements dle
Temperature ; operating
PRODUCT TYPE Optical Disk Drive
MODEL NUMBER MDC3064SS
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: 1) This device may not cause harmful interference, and 2) this device must accept any
interference received, including interference that may cause undesired operation.
RESPONSIBLE PARTY
NAME Fujitsu Computer Products of America, Inc.
ADDRESS 2904 Orchard Parkway, San Jose, CA 95134-2009
Telephone: (408) 432-6333
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1)Reorient or relocate
the receiving antenna, 2)Increase the separation between the equipment and receiver, 3)Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected, and/or 4) Consult the dealer or an experienced radio/TV technician for help
Class 1 Laser Product
This product is a class 1 laser product
to EN 60825/IEC 825. The label shown
to the right is affixed to the product. CLASS 1 LASER PRODUCT TO EN 60825/1EC 825
LUOKAN 1 LASERLAITE (EN 60825/IEC 825)
ng anes DE LA CLASSE 1 (EN 60825
"IE )
LASER KLASSE 1 PRODUKT NACH EN 60825/1IEC 825
EN 60825/IEC 8251-R7<( DF AIL—-+-NA
PRODUCTO LASERICO DE CLASE 1 SEGUN EN 60825
/IEC 825
USING DYNAMO_ 8