Introduction; Replacement And Compatibility - Autronica AutroGuard Retro Manual

Introduction

1. Introduction

1.1 Replacement and Compatibility

AutroSafe Detector
116-BDH-200
116-BDH-300
116-BDH-500
116-BDH-500/EX
116-BDH-500/N
116-BHH-200
116-BHH-220
116-BHH-300
116-BHH-320
116-BHH-500
116-BHH-500/EX
116-BHH-500/N
116-BHH-500/S
116-BHH-500/S/EX
116-BHH-500/S/N
116-BHH-520
116-BHH-520/EX
116-BHH-520/N
AutroGuard Retro used as spare part replacement for AutroSafe detectors_eng , Doc-1016807-1, 2024-01-09,
AutroGuard Retro is a 1:1 replacement for all AutroSafe detectors
when replaced with the matching AutroGuard Retro variant. When
used with the panel versions below there is no need to change the
base, update the firmware or change the configuration.
AutroGuard Retro is compatible with:

AutroSafe 3 version 3.6 and higher

AutroSafe 4 all versions

Autroprime all versions
AutroGuard Retro Spare part variant
116-BDH-200/SPARE
116-BDH-300/SPARE
116-BDH-500/SPARE
116-BDH-500/EX/SPARE
116-BDH-500/N/SPARE
116-BHH-200/SPARE
116-BHH-220/SPARE
116-BHH-300/SPARE
116-BHH-320/SPARE
116-BHH-500/SPARE
116-BHH-500/EX/SPARE
116-BHH-500/N/SPARE
116-BHH-500/S/SPARE
116-BHH-500/S/EX/SPARE
116-BHH-500/S/N/SPARE
116-BHH-520/SPARE
116-BHH-520/EX/SPARE
116-BHH-520/N/SPARE
Autronica Fire and Security
Page 2