Storage - Silvercrest SRWB 1000 A1 Operating Instructions Manual

Make sure that the air intake grille 4 is free of hair and fluff. Clean it with
■
the help of a dry brush.
Clean the filter behind the air intake grille 4 at regular intervals, at the latest
■
when dirt is visible. To do this, remove the air intake grille 4 (see figs. 3 and
4) by turning it until it stops moving and then pulling it down (if necessary,
turn it slightly back and forth at the same time). Remove lint and dirt from the
filter with your fingers and a soft brush if necessary. Press the filter back into
the basket of the air intake grille 4 so that you can then put the air intake
grille 4 back on. Slide the air intake grille 4 onto the receptacle on the
appliance and screw it tight. Note the two small recesses on the base of the
power cable 6 (see fig. 4), into which the matching counterparts on the
inside of the opening in the air intake grille 4 must be pushed.
Fig. 3
■ Wipe the appliance with a dry cloth if necessary.

Storage

ATTENTION! Do not pack up the appliance or transport it until it has
cooled down. Risk of burns!
Clean the appliance and the attachments 8–q as described in the section
■
"Cleaning".
You can store the appliance by hanging it up by the hanger 5.
■
■ Store the appliance in a dust-free and dry location.
SRWB 1000 A1
Fig. 4
GB │ IE │ 11 ■