Page 2
NAMES AND FUNCTIONS OF REMOTE CONTROL UNIT REMOTE CONTROLLER This controls the operation of the indoor unit. Signal range to reach indoor unit is about 7 meters. If inverter lamp is used, the range of control may be shorter. This unit can be fi xed on a wall using the fi xture provided. Before fi xing it, make sure the indoor unit can be controlled from the remote controller.
COOLING OPERATION Use the device for cooling when the outdoor temperature is 21 ~ 43°C. If indoors humidity is very high (over 80%), some dew may form on the air outlet grille of the indoor unit. Press the selector button so that the display indicates (COOL).
SILENT OPERATION During Cooling mode, press the selector button so that the display indicates (SILENT) along with the (COOL) symbol. Silent operation starts with a beep. CANCELLATION of SILENT Operation Cancel Condition Operation mode after cancel Key press Stop operation Selected mode operation (COOLING) (SILENT)
DEHUMIDIFYING OPERATION Use the device for dehumidifying when the room temperature is over 16°C. When it is under 15°C, the dehumidifying function will not work. Press the selector button so that the display indicates (DEHUMIDIFY). The FAN SPEED is set at LOW automatically. The FAN SPEED button does not work during DEHUMIDIFY operation.
FAN OPERATION In Fan operation mode the device is function as an air circulator. Press the selector button so that the display indicates (FAN). Set the desired FAN SPEED with the button. (the display indicates the selectable setting). (HI) : High fan speed. (MED) : Medium fan speed.
Page 7
ONE-TOUCH POWERFUL MODE Press the button. Operation start with a signal received sound “beep”. ● Unit will be forced operate in (COOL) with POWERFUL ● MODE fan speed for 20 minutes, within this 20 minutes, fan speed may varies. Indicator appear during this period. (Operation lamp at indoor unit is blinking).
Page 8
HOW TO SET THE AIR SLEEP TIMER Press the button, and the display changes as shown below. Mode Indication Air Sleep Timer Air Sleep Timer Air Sleep Timer: The device will continue working for the designated number of hours and then turn off. Point the signal window of the remote controller toward the indoor unit, and press the AIR SLEEP TIMER button.
HOW TO SET THE TIMER ■ ON Timer and OFF Timer are available. OFF Timer Reservation ■ Operation stop at setting time OFF TIME setting Select the OFF TIME by pressing the (OFF TIMER) ● Button. Setting time will change according to the below sequence ●...
Page 10
AIR FLOW LOUVERS ADJUSTMENTS Adjustment of the conditioned air in the upward and downward directions. The horizontal air defl ector is automatically set to the proper angle suitable for each operation. The defl ector can be swung up and down continuously and also set to the desired angle using the “...
Page 11
HOW TO EXCHANGE THE BATTERIES IN THE REMOTE CONTROLLER When using the remote control, if there is no response from the air conditioner unit and or the remote control has fading and dim displays, the batteries in the remote control device need to be removed and replaced with new ones Remove the cover as shown in the fi...