Table of Contents
Advertisement
reo
recording and playback /
Second Audio Program (SAP)
i
AUDIO SELECT
SET +/-
VCR MENU
ENTER
CANCEL
The VHS Hi-Fi audio system permits high fidelity record-
ing of MTS STEREO TV broadcasts.
When a MTS STEREO broad-
cast is received, "STEREO" will
appear on the screen for about 4
seconds and the program can
be viewed or recorded in stereo.
The Hi-Fi stereo recording pro-
cedure is the same as for normal
recordings.
Note:
When using a CATV system, stereo TV programs may be
transmitted over a mona cable channel. In this case
"STEREO" will not appear and the sound will be in mona.
AUDIO SELECT
AUDIO
Output selection
When viewing an MTS stereo TV program, or playinga
_rerecordedVHS Hi-Fi stereo videotape, pressAUDIO
SELECT to select how the audio will be heard through
the speakers. Normally set to the Hi-Fi stereo position,
this button can be set to the MONa positionif the stereo
broadcast or videotape audio is of poor quality. The "R"
and "L" positionsallow the audio from the Right or Left Hi-
Fi channel to be heard over both TV speakers. This
button has no effect when viewing a MONa videotape or
TV program.Each time when you pressthe button,
OUTPUT SELECTION display appears an the screen for
several seconds. Refer to the chart below.
OUTPUT
SOUND HEARD ON BOTH
SELECTION
SPEAKERS
STEREO
STEREO
LCH
LEFT CHANNELAUDIO
R CH
RIGHT CHANNELAUDIO
MONa
MONa
Your DVDNCR is fitted with a SAP broadcast system which
enables you to switch to a second audio program when
viewing a selected channel.
This function applies only when the program is broadcast
in mull-languages through the SAP broadcast system.
Press VCR MENU. Then press SET + or- to
select "SAP".
VCR MENU
SETUP
CD
Press ENTER to select "ON".
Then press VCR MENU
until the
menu screen
is cleared.
VCR MENU
SETUP
Listening to SAP
When the VCR is turned on or a channel selection is
made, make certain the letters "SAP" appears on the
screen for about 4 seconds. This means that the "Second
Audio Program" broadcasting is avatabIe.
OR
Notes:
• When playing back a tape that is not recorded in Hi-Fi stereo
mode, the audio will automatically
be monaural.
• When listening to a VHS Hi-Fi video tape or MTS broadcast
through the VHF/UHF jack (Audio/Video cable not connected),
the sound will be monaural.
391
Advertisement
Table of Contents
