Pioneer LaserDisc CLD-1450 Operating Instructions Manual

BUTT WITS.
Laserviston
CLOM450
Thank you for buying this Pioneer product.
Please read through these operating instructions so you
will know how to operate your model properly. After you
have finished reading the instructions, put them away ina
safe place for future reference.
In some countries or regions, the shape of the power plug
and power outlet may sometimes differ from that shown in
the explanatory drawings. However, the method of
connecting and operating the unit is the same
Mains voltages in Saudi Arabia are 127V and
220V only. Never use this model with 110V
setting in Saudi Arabia.
The line voltage selector switch is located on the rear panel
of this player. Before your player is shipped from the
factory, the switch is set to the power requirements of the
player's destination. Check that it is set properly before
plugging the power cord into the outlet. If the voltage is not
porperly set or if you move to an area where the voltage
requirements differ, adjust the selector switch as follows:
Use a medium-sized (flat blade) screwdriver. Insert the tip
of the screwdriver into the groove of the selector switch
and turn it to set the player to the power voltage of your
area.
Set the selector so
that arrow points
power voltage of
your area (Figure
shows arrow point-
ing to 110 voits.}
Y PIONEER'
The future of sound and vision.