Rewind & Play Operation; Dash & Play Operation; Zero-Stop Operation - Kenwood KX-W6080 Instruction Manual

®@ Rewind & Play operation
This operation cannot be performed with the remote
control (of the separately sold amplifier}.
Direction of tape direction indicator:
REVERSE sToP
C
FORWARD
OD
Press simultaneously
~« Led
Direction of tape direction indicator: <d
REVERSE FORWARD ««
==
D>
C\
Press simultaneously
Hf Single-tune repeated playback
operation
1 Play the tune to be repeated.
2 Press the play key of the same direction as
the current tape transport direction.
ee ed
te nd
aa
QA
When direction of tape direc-
tion indicator is >:
e@ Normal playback resumes after repeating the same tune
for 16 times
@ Playback 1s stopped and canceled.
M@ Zero-stop operation
This operation cannot be performed with the remote
control (of the separately sold amplifier).
Press simultaneously.
2-1: SOR ae STOP eee
y!
Fast winding in the >
direction
Fast winding in the =
direction
@ Tapes wound until counter reading near" 0000" where it stops.
W@ Dash & Play operation
The Dash & Play skips long non-recorded spaces auto-
matically as the tape is played.
This operation cannot be performed with the remote
control (of the separately sold amplifier).
1 Determine the playback mode (condi-
tions).
The display cnarges every %
you press
co'
Two sides are 'epeated only once,
e*ter which alayback
| Stops
: +
j "o'
Iwo
sides are repeatec
8 times.
after wricn
diaybacr
| stops
One side 5 repeated 8 times, after wrice paybacx stops
tl -
@ In case the REV.MODE key is set to "=>" and tapes are ir-
serted in both of the decks, when a ceck 'irishes Dash &
Play, the other deck starts Dash & Play for +6 tmes, after
which :t stops
Press once
Usage of counter
Before starting recording (playback), press ihe RESET A o:
RESET B key to reset the counter to "0000", and write down the
i counter reading when the recording (playback) should be stoppec
| in the middle of the tape, etc.; this will make it easy to locate the
same position when you want to continue recording (playback) nex"
' time.
it Is also possible to use the Zero-stop function to return tc
the position where recording (playback) was started
RESET A
KX-W6080/KX-W4080 (En) 13