1. Manuals
  2. Brands
  3. UMAX Technologies Manuals
  4. Scanner
  5. Astra 1200S
  6. Operation manual

UMAX Technologies Astra 1200S Operation Manual

Umax astra 1200s: user guide
Hide thumbs
Table of Contents

Advertisement

Quick Links

Scanner Operation Manual
This operation manual contains all the information you need to install your scanner. For quick
installation instructions, see the Quick Start Guide accompanying your scanner.
!
Make Sure the power is OFF before installing.
Important Safeguards
•
Read all of instructions.
•
Save these instructions for later use.
•
Follow all warning and instructions marked on the product.
•
When replacement parts are required, be sure that service technician has used
replacement parts specified by the manufacturer that have the same result in fire, electric
shock, or other hazards.
•
Do not use this product near water or in rainy/moist situation.
•
Do not place on an unstable table to avoid the series of damage to the product.
•
The product should be operated only from the type of power source indicated on the
marketing label.
•
Do not attempt o service this product yourself as opening or removing the enclosure may
expose you to dangerous voltage or other hazards.
•
This unit has an autoranging input circuitry suitable for 120Vac and 240Vac.
•
The sound pressure level at the operators position according to IEC 7041:1982 is equal or
less than 70dB(A).
•
The following adapters are approved to be used with TUV-GS:
ADP-12CB Rev. B/Delta, ADP-12CB Rev. C, WP10XY/Dow Dec, HES 10-311/Hitron.
For UL CSA Listed products, the adapter shall be UL, CUL, or CSA Listed Class 2
Power Supply.
UMAX Astra 1200S
Part No.: 830504-00
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Astra 1200S and is the answer not in the manual?

Questions and answers

Related Manuals for UMAX Technologies Astra 1200S

Summary of Contents for UMAX Technologies Astra 1200S

  • Page 1 UMAX Astra 1200S Scanner Operation Manual This operation manual contains all the information you need to install your scanner. For quick installation instructions, see the Quick Start Guide accompanying your scanner. Make Sure the power is OFF before installing. Important Safeguards •...
  • Page 2 The party responsible for product compliance: Corporate Name: Address: 10460 Brockwood Dr.; Dallas, TX 75238; U.S.A. Telephone No.: 214-342-9799 Model No.: Model No.: Op. Environment: For home or office use UMAX Technologies, Inc. Umax Astra 600P, H5E0 UTA-2A, H760...

  • Page 3: Table Of Contents

    Contents Preparation for Installation …………………………………………………………… 4 Installation on Macintosh ……………………………………………………………… 9 Installation on PC …………………………………………………………………….. 10 Completing First Scan ………………………………………………………………... 12 Troubleshooting ………………………………………………………………………. 14 Maintenance …………………………………………………………………………... 15 Specifications ………………………………………………………………………….. 16 Glossary ……………………………………………………………………………….. 17 Trademarks IBM PC/AT is a trademark of International Business Machines Corporation. MS-Windows, Windows, and MS-DOS are trademarks of Microsoft Corporation.

  • Page 4: Preparation For Installation

    Please remove all packing materials from the scanner. Check if any damage has occurred during shipment while you are unpacking the scanner. If you notice any damage, notify your dealer at once. Remember to save all shipping and packing materials if you want to transport the scanner in the future.

  • Page 6: Unlocking Your Scanner

    Warning: You must lock your scanner before transporting it, failure to do so can cause extensive damage to your scanner. Ensure that the scanner’s optical assembly is secure and the lamp is in the home position before...
  • Page 7 Power on Your Scanner Once the scanner has been unpacked and the optical assembly has been unlocked, the scanner is ready to perform this test. To power on the scanner, do the following: 1. Connect the power adapter to the scanner.

  • Page 8: Changing The Scsi Id Number

    1. Make sure the scanner is turned off. 2. Gently turn the switch until an unused number appears in the switch’s notch. Note: Do not use SCSI ID 8 and 9 on your scanner. They are for factory use only.

  • Page 9: Installation On Macintosh

    Installation on Macintosh Connecting the Scanner and your Macintosh When the scanner’s SCSI ID is properly set (see “Changing the SCSI ID Number” section for instructions on setting the scanner’s SCSI ID), do the following to connect the scanner to your computer: 1.

  • Page 10: Installation On Pc

    3. Attach the other end of the cable to one SCSI port of your scanner. 4. If your scanner is not chained to other SCSI devices or is the last device on the SCSI chain, please connect the Terminator to the remaining SCSI port of your scanner.
  • Page 11 Installing the Scanner Drivers for Windows Install the image editing software included with your scanner. (Refer to the instructions included with the software). To install the scanner drivers, do the following: 1. Insert the UMAX Scanner CD into your CD-ROM drive.

  • Page 12: Completing Your First Scan

    Completing your First Scan Original Image Placement 1. Raise the scanner’s document cover. 2. Place the photograph and document face down on the scanner. ‘Center the document along the center mark. 3. Lower the document cover. Start Your First Scan For Windows Users: 1.

  • Page 14: Troubleshooting

    Troubleshooting UMAX scanners are designed to be reliable and easy to install. If, however, you have a problem with your scanner, these troubleshooting steps should indicate the cause of the problem. If the scanner lamp flickers, is dim, or fails to come on: The scanner lamp is failing or has failed and needs to be changed.

  • Page 15: Maintenance

    Cleaning Regularly cleaning the object glass will ensure that dirt or smudges will not reduce the quality of your scanned images. Before you clean the glass, make sure the scanner is turned off and the power adapter is unplugged. Clean object glass and document cover with a soft damp cloth and a mild detergent or alcohol.

  • Page 16: Specifications

    Warm Up Time ………………………………………………………………………………………. 30 Sec. Sample Depth Color Mode ………………………………………………………………... 30/24 Bit/Pixel Internal Grayscale Mode .……………………………………………………………. 10/8 Bit/Pixel Internal Scanner Settings Scaling …………………………………….. 1% to 200% in 1% Increments at 1200 dpi Resolution Highlight/Shadow ………………………………………………………………………... 255 Steps Contrast/Brightness ………………………………………………………………... +100% ~-100% Gamma Curve ……………………………………………………………….

  • Page 17: Glossary

    Interface Card: Non-TWAIN Driver: Object Glass: A Macintosh system extension that addresses the UMAX scanner in Apple Scanner emulation mode. This is used for programs that do not support the Photoshop Plug-in protocol or do not drive the scanner directly.
  • Page 18 The indicator that glows when the scanner’s power cable is connected to the scanner and a “live” outlet and the power switch is turned on. One or more SCSI devices connected to the same SCSI controller. A device which connects to a computer using the SCSI interface.

Table of Contents