Preset Radio Stations; Programming Preset Stations - Philips AE 3750 Instructions For Use Manual

Preset radio stations
PROGRAMMING PRESET STATIONS
You can store the frequencies/meter bands of
up to 40 radio stations in the memory.
1. Select a waveband and tune to the desired
radio station.
2. Type in a number (1-40) to choose a preset
position.
3. Press PROGRAM (within 5 seconds) to
store the selected radio station.
- If the selected preset position is already
occupied, the preset frequency or station
will flash briefly on the display.
- If you wish to overwrite the current
preset, press PROGRAM (within 5
seconds) a second time. Your new
selection will now replace the previously
stored station.
Repeat steps 1-3 to store all preset stations in
this way.
Calling up a preset station
1. Type in the number of the preset position.
2. Press the PRESET A/V button briefly.
- If occupied, the set will automatically tune
to the selected preset position.
- If, however, the preset position is free,
the display will only show PRESET, the
preset position and FREE for 5 seconds.
s»cnajlCD
mnillllllllil!
f r
a
*1
tcun
i
Dt u
OJM
TMC
pf&scr
f
n l U'U>
Checking stations stored
1. If you wish to check whether a station has
already been stored on one of the preset
positions, tune to the desired radio station.
2. Keep PROGRAM pressed.
- PRESET appears on the display. If the
station is already stored, the preset
position number will appear next to
PRESET.
- If the radio station is not stored, no preset
position will be shown and PRESET will
disappear from the display.
Checking free preset positions
The FREE PRESET button can be used to
check the availability of free preset positions.
1. Press FREE PRESET once.
- PRESET, the first free preset number and
FREE appears on the display.
2. Press FREE PRESET repeatedly to view
other free preset positions.
Clearing a preset position
1. To clear an occupied preset position, type in
the preset number, using the numeric
buttons.
2. Press FREE PRESET.
- The frequency located on the selected
preset position will start flashing on the
display.
3. Press the FREE PRESET button (within 5
seconds) a second time to clear the preset
position.
Searching or reviewing preset positions
1. Keep PRESET
A
or V pressed until the
preset number starts to flash on the display.
- Each preset station will be heard for 5
seconds.
2. At the desired preset, press either
PRESET
A
or
v
and the set will now be
tuned to the selected preset station.
8