Table of Contents
Advertisement
Quick Links
4 BURNER BBQ
•
Powder coated double skinned roasting hood
•
Total heat output 53.6MJ/h
•
4 burners provide 46MJ/h heat output (4 x 11.5MJ/h)
•
Flush mounted stainless steel side burner provides
7.6MJ/h heat output
•
Rust resistant powder coated body
•
Cast iron hotplate and grills
Important: Retain these instructions for future use.
QUASAR 4
Model No. GM172-202
OUTDOOR USE ONLY
Gasmate
®
is a registered trademark of
Sitro Group Australia Pty Ltd www.gasmate.com.au
Aber Living, N.Z. www.gasmate.co.nz
•
Stainless steel burners with individual controls
and enamel flame tamers to give even heat and
reduce flare-ups
•
Assembled dimensions (mm): 1400W x 1130H x 545D
•
Total cooking area (mm): 720W x 420D
•
Gas certified to Australian & New Zealand Standards
5574 07/23
Advertisement
Table of Contents
Related Manuals for Gasmate QUASAR 4
Summary of Contents for Gasmate QUASAR 4
- Page 1 Rust resistant powder coated body • Cast iron hotplate and grills OUTDOOR USE ONLY Important: Retain these instructions for future use. 5574 07/23 Gasmate ® is a registered trademark of Sitro Group Australia Pty Ltd www.gasmate.com.au Aber Living, N.Z. www.gasmate.co.nz...
-
Page 2: General Information
GENERAL INFORMATION If you are unable to correct the leak by tightening the IMPORTANT connections, turn off the gas and contact the supplier immediately. Read these instructions carefully prior to Always ensure the barbecue is kept away from flammable use. Familiarise yourself with the appliance before materials and the gas cylinder clear of any heat source. - Page 3 GENERAL INFORMATION FOR YOUR SAFETY • This barbecue must not be used indoors. • Only use in well ventilated areas. Failure to comply with these instructions could result • CARBON MONOXIDE HAZARD - USING THIS in a fire or explosion which could cause serious bodily injury, death or property damage.
-
Page 4: Protect Children
GENERAL INFORMATION ASSEMBLY INSTRUCTIONS LOCATION OF YOUR BARBECUE Before assembling the barbecue, read these Instructions carefully. DO NOT use your barbecue in garages, porches, breezeways, sheds or other enclosed areas. Your Assemble the barbecue on a flat, clean surface. barbecue is to be used OUTDOORS. The barbecue is The barbecue is heavy. -
Page 5: Exploded Diagram
EXPLODED DIAGRAM... - Page 6 ASSEMBLY INSTRUCTIONS STEP 1 Attach the castors by screwing them into the bottom shelf of the cabinet as shown below. Turn shelf over to sit on a flat surface. STEP 2 Attach the cabinet side and back panels to the bottom shelf with with 9 x M6x12 bolts (A) as shown below. M6x12 (9x)
- Page 7 ASSEMBLY INSTRUCTIONS STEP 3 Attach the door beam to the cabinet with 4 x M6x12 bolts (A) as shown below. Attach the door stopper with 2 x M5x12 bolts in the middle of the cabinet bottom shelf at the front. M6x12 (4x) M5x12 (2x) STEP 4...
- Page 8 ASSEMBLY INSTRUCTIONS STEP 5 Attach the doors to the cabinet with the hinge pins at top and bottom as shown below. STEP 6 Attach the firebox assembly to the top of the trolley with 4 x M6x12 bolts (A) as shown below. M6x12 (4x)
- Page 9 ASSEMBLY INSTRUCTIONS STEP 7 Attach the left side burner front panel to the side burner shelf with 2 x M6x12 bolts (A). Attach the side shelf front panel to the side shelf with 2 x M6x12 bolts (A). M6x12 (4x) STEP 8 Fix 8 x M6x15 bolts (D) to the sides of the cabinet.
- Page 10 ASSEMBLY INSTRUCTIONS STEP 10 Attach the handle to the hood using 4 x M6x12 bolts (A). Attach all control knobs to control panel. Insert the flame tamers into the fire box over 2 burners starting from the left burner. Then add cast iron grill over the burners with the flame tamers.
- Page 11 ASSEMBLY INSTRUCTIONS STEP 12 STEP 13 Step 12 Step 12 Step 13 Step 13 Step 12 Step 13 Attach the regulator to your gas cylinder. Attach the regulator to your gas cylinder. Step 12 Turn on the gas cylinder ensuring that all of the controls Attach the regulator to your gas cylinder.
-
Page 12: General Assembly
GENERAL ASSEMBLY CONNECTING & DISCONNECTING TO GAS REGULATOR SAFETY FEATURE SOURCE All QCC regulators (the part that attaches to the gas cylinder to regulate the flow of gas) have a safety feature included that restricts gas flow in the event of a gas leak. IMPORTANT: You can inadvertently activate this safety feature without having a gas leak. -
Page 13: Lighting Procedure
LIGHTING PROCEDURE SIDE BURNER Before lighting your barbecue for the first time, read the instructions fully to ensure the barbecue is assembled 1. Lift up the hood or side burner cover (ensure it is correctly and is ready for use. always open when the burner is alight). - Page 14 BURNER OPERATION & IGNITION SYSTEM CHECK Problem Possible Reason Solution Valve on cylinder is closed Open the valve on the cylinder Burner will Control knob is closed Push in and turn the knob anti-clockwise not ignite Electronic igniter is faulty Use a long barbecue match (see page 15) Burner has gone out Check that the gas bottle is not empty...
-
Page 15: Operating Procedure
OPERATING PROCEDURE CARE & MAINTENANCE BURN OFF COOKING SURFACES MAINTAINING STAINLESS STEEL SURFACES We recommend operating your barbecue on its highest As with all appliances, proper care and maintenance setting for 15-20 minutes prior to first use. This aids will keep them in top operating condition and prolong removing the oils used during manufacturing. - Page 16 apply a coat of cooking oil. Due to the weight of the grills, 10. Keep the center line of tube and nozzle on one line. it is not recommended they are cleaned in a dishwasher. WARNING: If the instructions above are not followed, Do not use cleaners that contain acid, mineral spirits or an explosion may result, possibly causing serious bodily xylene.
-
Page 17: Partial Enclosures
PARTIAL ENCLOSURES INSTALLATION POSITIONING The appliance shall only be used in an above ground, open air situation with natural ventilation, without stagnant areas, where gas leakage and products of combustion are rapidly dispersed by wind and natural convention. WARNING • Do not use the barbecue in enclosed or on small balconies. - Page 18 This page has been left intentionally blank...
- Page 19 This page has been left intentionally blank...
-
Page 20: Limited Warranty
2 YEAR LIMITED WARRANTY Aber Living warrants the purchaser of this product against defects in workmanship and material, for a period of up to 24 months from the date of purchase. The warranty is non-transferable and becomes void if used for commercial or rental purposes.
Need help?
Do you have a question about the QUASAR 4 and is the answer not in the manual?
Questions and answers
How to ignite the back burner, using the controls.
1. Open the hood of the barbecue before attempting to light the burners.
2. Turn all control knobs clockwise to the "OFF" position.
3. Ensure the cylinder valve is in the "OFF" position.
4. Turn the control knob for the back burner anti-clockwise to "HIGH" (a single click should be heard).
5. Check if there is sparking at the burner ignition point.
6. If there is no spark, check that the ignition lead is firmly attached to the control and sparker tip.
7. Once sparking is established, turn the cylinder valve "ON".
8. Push down and turn the control knob anti-clockwise to "HIGH" again to ignite the burner.
9. Observe if the burner has lit. If not, repeat the process.
10. If the burner fails to ignite after several attempts, turn the control knob to "OFF," wait a few minutes, and try again.
This answer is automatically generated