Installation; Tools & Parts Required For Installation - United Chargers Grizzl-E Classic User Manual & Installation Manual

4. Installation

4.1 Tools & Parts Required for Installation
Prior to mounting, determine the location of an acceptable mounting support. All charging
station products must be anchored into a mounting support such as a 2" x 4" stud or a solid
concrete wall. DO NOT mount this unit directly to a stucco/drywall/wall board.
Tool
Mounting Bracket
Front Pate
Screws (x4)
Back Plate
Screws (x2)
™
EasyEvPlug
Holster/Tesla Holster
Holster
Screw (x4)
Holster
Anchors (x4)
Screwdriver
Allen key
Allen key
Size
10 x 5.8 x 1.4 in
(255 x 48 x 36 mm)
5/16" x 1/2"
#14
#8
1-1/4"
#8
PH3
5/32 "
3/16"
Source of Supply
Included with Product
Included with Product
Included with Product
Included with Product
Included with Product
Included with Product
Commercially
Available
Commercially
Available
Commercially
Available
Remark
For mounting the charging
station to the wall/structure
For securing the charging
station to the Mounting
Bracket
For installing the Mounting
Bracket to the wall/structure
To store the EV charging Plug
and Cable
For installing the
™
EasyEvPlug to the wall/
structure
For installing the
™
EasyEvPlug to the wall/
structure
For optional
Hardwire Install
For Charging Station Cover
Screws
For installing the enclosure
plate to the back of the
station body.
14