Movement (General); Model No. 22 Movement - Timex 22 Service Manual

MODEL 22 MOVEMENT
9 X 10 LIGNE
Attached sketches, with descriptive notes show the follow
ing:
Plate
I)
Completely exploded view of movement.
Plate II)
Removing crown and stem.
Plate
III)
Correct location for dust seal.
Plate
IV)
Remove dial and movement assembly.
Plate
V)
Power release from the mainspring.
Plate
VI)
Removing balance wheel.
Plate
VII)
Removing pallet lever and escape wheel.
Plate VIII)
Change balance wheel.
Plate
XI)
Change pallet lever and escape wheel.
Plate
X)
Refitting cannon pinion.
As stated previously, with only the balance assembly, cannon
pinion, ratchet wheel bridge, ratchet wheel and click removed
from the movement it is possible to clean thoroughly and effic
iently without further dismantling. For this purpose the use of
a cleaning machine is advantageous but not an absolute necessity.
The movement should be placed in the cleaning basket with
the front frame upwards to accomplish proper draining of fluid
from mainspring barrel; it should be well swirled in the cleaning
fluid after which at least two sets of rinsing fluid should be used,
of which the final, especially, must be absolutely clean. The
movement then should be thoroughly dried.
4