How To Change; Tape Speed - Panasonic RS-736US Service Manual

CUE SWITCH MOUNTING POSITION
ADJUSTMENT
Adjustment:
1. Stop the mechanism.
2. Move the cue switch angle in the direction of arrow
C.
3. Move the cue switch until part A contacts the cue
lever, and with the cue switch lever pressed in at the
right end of the cue lever, mount the cue switch.
4. After mounting the switch, place the unit into the FF
or REW mode, and make sure that there is an interval
of more than 0.5 mm between the right end of the
cue lever and the cue switch lever when the cue
lever knob is fully pressed in the direction of arrow
(Operating shaft)
Upper base plate
Fig. 32
Cue switch angle
Slide switch
HOW TO CHANGE TAPE SPEED
When changing the tape speed, do so in the following
order.
The tape speed of this unit can be changed to either
3-3/4 ips or 7-1/2 ips by simply moving the tape speed
selector.
By mounting the adaptor (included), the unit can be
used to record and playback at 15 ips.
(Be sure that the function lever is in the STOP position
before changing the tape speed.)
(1) Set the tape speed selector to the desired position.
(2) Set the equalizer changeover switch to the desired
tape speed (same as (1) above).
How to install the 15 ips adaptor:
For 15 ips speed, the pressure roller and capstan for
15 ips must be used in addition to items (1) and (2)
above.
16