Receiving Pairing Request From Other Devices; Turning Off Bluetooth Visibility; Turning On The Bluetooth Audio; Turning Off The Bluetooth Audio - Motorola APX 8000XE User Manual

Hide thumbs Also See for APX 8000XE:
Table of Contents

Advertisement

6.19.4.3

Receiving Pairing Request from other Devices

Procedure:
Turn on your radio Bluetooth Visible mode.
Your radio automatically accept the request and pair with any request received from other
device.
6.19.4.4

Turning Off Bluetooth Visibility

Prerequisites:Ensure that Bluetooth Visibility is turned on.
When and where to use:The following methods are options on how to turn off Bluetooth visibility. The
result of all the methods is the same. You can use the options interchangeably depending on your
preference and the programmed functions.
Procedure:
Press and hold the preprogrammed Bluetooth Inquiry On/ Off button for three seconds to
disable the Bluetooth visibility feature.
One of the following scenarios occurs:
-
You hear a short, medium-pitched tone, the display shows VISI OFF.
-
If the visibility fails to turn off, the display shows VISI OFFFAILED.
6.19.5

Turning On the Bluetooth Audio

Procedure:
Turning on the Bluetooth audio using the preprogrammed button:
a. Press the preprogrammed Bluetooth Audio Reroute button to route the audio from the
radio to the headset.
You hear a short, medium-pitched tone. The display shows HDSET ON.
BT audio routing can be configured in CPS to route the audio to RSM or radio's internal speaker.
The audio routes to the radio's speaker if RSM is not connected. Check with your dealer or
system administrator for more information on the programming of this feature.
NOTICE: For BT PTT press, the active microphone can be configured in CPS to transmit
from either the RSM, the radio microphone, or the BT headset. If the configured device
is not available, audio transmission reverts to BT headset.
6.19.6

Turning Off the Bluetooth Audio

Procedure:
Turning off the Bluetooth audio using the preprogrammed button:
a. Press the preprogrammed Bluetooth Audio Reroute button to route the audio from the
headset to the radio.
You hear a short, medium-pitched tone. The display shows SPKR ON.
MN002667A01-AR
Chapter 6: Advanced Features
63

Advertisement

Table of Contents
loading

Table of Contents