Fixed Station Operation - Kenwood TS-120S Operating Manual

es
(6) Battery Capacity
The power system of 2 motor vehicle is comprised of @
battery and an alternator (when generates power while the
'engine is running) to supply current to loads or to charge the
battery.
Since the transceiver draws hi current. during transmit care
should be excersised so the power system is not overloaded.
When using the transceiver. the following points should be
observed from the viewpoint of battery maintenance
ning,
@ Mf necessary. use an ammeter and/or a voltmeter to
'check battery condition
4.8 FIXED STATION OPERATION
4
The TS-120V power requirement is 4A at 13.8 VOC when
transmitting with full power. The Kenwood model PS-20
power supply for fixed stations matches the TS-120V in
design and performance.
The TS+120S requires more than 18A at 13.8 VDC when
transmitting with full power. Use the Kenwood model PS-
30 power supply for fixed stations,
Power
4.8.2. ANTENNA
Fig. 4-13 Rotary Beam Antenna
&. ener a
7