Teltonika GH5200 First Start-Up Quick Start Manual
  1. Manuals
  2. Brands
  3. Teltonika Manuals
  4. GPS
  5. GH5200
  6. First start-up quick start manual

Teltonika GH5200 First Start-Up Quick Start Manual

Autonomous personal tracker for lone worker protection
Hide thumbs Also See for GH5200:
1
2
3
4
5
6

Advertisement

Table of Contents

https://wiki.teltonika-gps.com/view/GH5200_First_Start
GH5200 First Start
Main Page
>
Autonomous Trackers
GH5200 is an autonomous personal tracker for lone worker protection.
Contents
1 Know your device
2 Set up your device
2.1 How to insert Micro SIM card and connect the battery
Know your device
Set up your device
How to insert Micro SIM card and connect the battery
1.
Remove the cover.
2.
Insert Micro-SIM card as shown with PIN request disabled. Make sure that Micro-SIM card
cut-off corner is pointing forward to slot.
3.
Insert the battery as shown to device. Position the battery in place where it does not obstruct
other components.
4.
Reattach the cover and tighten the screw.
>
GH5200
> GH5200 First Start

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GH5200 and is the answer not in the manual?

Questions and answers

Related Manuals for Teltonika GH5200

Summary of Contents for Teltonika GH5200

  • Page 1: Table Of Contents

    > Autonomous Trackers > GH5200 > GH5200 First Start GH5200 is an autonomous personal tracker for lone worker protection. Contents 1 Know your device 2 Set up your device 2.1 How to insert Micro SIM card and connect the battery 2.2 PC Connection (Windows)

  • Page 2: Pc Connection (Windows)

    – You will need to install USB drivers, see “How to install USB drivers (Windows)” shown below. Using Bluetooth – GH5200 Bluetooth is enabled by default. Turn on Bluetooth on your PC, then select Add Bluetooth or other device > Bluetooth. Choose your device named –...

  • Page 3: How To Install Usb Drivers (Windows)

    Click Finish to complete the setup. Configuration (Windows) At first GH5200 device will have default factory settings set. These settings should be changed according to the user's needs. Main configuration can be performed via Teltonika Configurator software. Configurator operates on Microsoft Windows OS and uses prerequisite MS .NET Framework.
  • Page 4 Various Status info tabs display information about GNSS, GSM, I/O, Maintenance and etc. GH5200 has one user editable profile, which can be loaded and saved to the device. After any modification of configuration the changes need to be saved to device using Save to device button.

  • Page 5: Quick Sms Configuration

    1 hour passes while device is stationary Records sending to server: If device has made a record it is sent to the server every 120 seconds After successful SMS configuration, GH5200 device will synchronize time and update records to configured server.

  • Page 6: Safety Information

    Safety information This message contains information on how to operate GH5200 safely. By following these requirements and recommendations, you will avoid dangerous situations. You must read these instructions carefully and follow them strictly before operating the device! Precautions Operate the device in suitable conditions Do not use the device where mobile connectivity is forbidden.

Table of Contents