Table of Contents
Advertisement
BLDC Shield TLE9563-3QX
User guide
3 Getting started
3
Getting started
There are two options to operate the TLE9563
•
Stacked on an Arduino UNO board or compatible
•
Config Wizard for MOTIX
3.1
Arduino UNO controller board
Figure 19
TLE9563 board stacked on an Arduino UNO board
Infineon offers the TLE9563 device driver to provide an
devices.
TLE9563 device driver is available here:
bldc-motor-control-ics/bldc-motor-system-ics/tle9563-3qx/
Example codes to operate with an Arduino UNO board are available here:
system-ic-tle956x
Before using the
BLDC
shield with an Arduino, refer to
User guide
BLDC
shield:
Motor System
integrated circuit
™
https://www.infineon.com/cms/en/product/power/motor-control-ics/
(IC)s with uIO-Stick
application programming interface (API)
https://github.com/Infineon/motor-
Arduino getting started
for further information.
23
Arduino Uno
Board
to configure the
Rev. 1.10
2023-11-17
Advertisement
Table of Contents
Need help?
Do you have a question about the TLE9563-3QX and is the answer not in the manual?