Table of Contents
Advertisement
Note:
A device with Bluetooth
that is connected to your product, connects
automatically to your product the next time the product is
used with the device.
To change audio streaming
•
Push and hold the volume up button for 0.5 seconds
to select the next audio streaming.
•
Push and hold the volume down button for 0.5
seconds to go back to the previous audio streaming.
To stop or start the audio streaming
•
Push the mode button to stop or start the audio
streaming.
To accept, end or dismiss a phone call
If your mobile device is connected to the product with
®
Bluetooth
wireless technology, a signal is heard in the
earmuffs when there is an incoming phone call.
•
Push the mode button to accept or end the phone
call.
•
Push the mode button for 1 second to dismiss an
incoming phone call.
Note:
A beep sound tells you when the phone call
is accepted or dismissed.
Audio message
CALL ENDED
To do maintenance on the product
CAUTION:
product fully into water.
CAUTION:
cleaning agents that contain solvents and/or
alcohol can decrease the protective function.
CAUTION:
spare parts.
1. Clean the product regularly. Use a cloth and a weak
soap solution.
2. Do a check of the condition of the sealing rings and
the foam rubber inserts before each use.
2146 - 003 -
®
wireless technology
Information
The phone call has
ended.
Maintenance
Do not flush or put the
Spray, liquids or other
Use Husqvarna original
To adjust the volume
•
Push the volume up button or volume down button to
adjust the volume. A beep sound tells you when the
volume is at the minimum or maximum level.
To set to ambient sound mode
Ambient sound mode lets you hear the sounds around
you.
•
Push the ambient sound button.
Note:
An audio message tells you the status of the
ambient sound mode.
Audio message
AMBIENT LEVEL HIGH
AMBIENT LEVEL MEDIUM
AMBIENT LEVEL LOW
AMBIENT LEVEL OFF
To stop the product
•
Push and hold the on/off button for 1 second.
Note:
An audio message tells you the battery
status and the LED indicators go out. A beep sound
tells you that the product is off.
To stop the product by force
•
Push and hold the on/off button for 12 seconds.
3. Replace the sealing rings and the foam rubber
inserts each 6 months or more frequently if it is
necessary. Make sure that the air hole on the sealing
ring points down during assembly. Use the original
hygiene kit that includes the sealing rings and the
foam rubber inserts. Refer to www.husqvarna.com
for more information about the hygiene kit.
9
Advertisement
Table of Contents
