Programme and Consumption Table of Contents Table ..........1 Safety Instructions ......Programme Selection ....25 Intended Use ........ Programmes ........25 Safety of Children, Vulnerable Per- Temperature Selection ....28 sons and Pets ......Spin Speed Selection..... 28 Electrical Safety ......Auxiliary Function Selection....
Page 3
Please read this user manual first! Dear Customer, Thank you for choosing Grundig product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents care- fully before using the product.
1 Safety Instructions This section includes the safety • The product must only be instructions necessary to pre- used for washing and rinsing vent the risk of personal injury or of laundry that are marked ac- material damage. cordingly • This appliance is intended to Our company shall not be held be used in household and responsible for damages that...
ing use of the appliance in a • Cut the power cable and the product safe way and the break and deactivate the lock- hazards involved. ing mechanism of the loading • Children under the age of 3 door before disposing of the should be kept away unless product for children’s safety.
• When unplugging the appli- Installation Safety ance, don't hold the power • Check the information on the cord, but the plug. manual and installation in- • Make sure the plug is not wet, structions to prepare the dirty or dusty. product for installation and Handling Safety make sure the electrical...
Page 7
• Place the product on a level be running from the tap in a and hard surface and balance minute in order for the product with the adjustable legs. to function properly. If the wa- • Connect the product to a ter pressure is above 1 MPa grounding plug protected by a (10 Bars), a pressure-reducing...
• Make sure pets do not climb Operational Safety inside the product. Check in- • When you are using the appli- side the product before use. ances, use only detergents, • Do not force open the locked softeners and supplements loading door.
charge hose is connected to • Do not use sharp or abrasive the tap. Do not touch the dis- tools to clean the product. Do charge water. not use household cleaners, • Take the following precautions soap, detergent, gas, gasol- to prevent formation of biofilm ine, thinner, alcohol, varnish, and malodours:...
2 Important Instructions for Environment 2.1 Compliance with WEEE Direct- This product complies with EU WEEE Directive (2012/19/EU). This product bears a classifica- tion symbol for waste electrical and electronic equipment (WEEE). This product has been manu- factured with high quality parts and materials which can be reused and are suitable for re- cycling.
4 Installation 4.1 Appropriate Installation Loca- Please read the “Safety Instructions” tion section first! • Place the product on a hard and level Your washing machine automatically floor. Do not place it onto a carpet with detects the amount of laundry high pile or other similar surfaces.
Tilt the machine back slightly. Rest the tabs NOTICE of Cover A against the lower panel. Com- Remove the transportation safety plete the assembly by rotating the cover. bolts before operating the product. • Cover B and the Cap are optional. If avail- Otherwise, the product will get dam- able, attach cover B and the Cap.
e. The end of the hose should not be bent, it should not be stepped on and the hose must not be pinched between the drain and the product. Otherwise, water dis- charge issues may emerge. f. If the length of the hose is too short, use it by adding an original extension hose.
• Connection must comply with national 4.8 Start Up regulations. Before starting to use the product make sure • The electrical connection cable infrastruc- that the preparations described in section ture of the product must be adequate and “Environmental instructions” and “Installa- suitable for product requirements.
• Wash trousers and delicate laundry turned not open, apply the solutions provided for inside out. “Loading door cannot be opened” error in • Laundry that are subjected to materials the Troubleshooting section. such as flour, lime dust, milk powder, etc. 5.5 Correct Load Capacity intensely must be shaken off before pla- cing into the product.
The detergent drawer comprises of three 5.6.1 Automatic Dosing compartments: Initial Installation (1) Liquid detergent compartment Turn on the machine with On/Off button. (2) Powder detergent compartment Dosage symbol ( ) appears in programs (3) Softener compartment where detergent dosing is allowed. If the li- •...
f. After closing the detergent drawer, the 5.6.2 Dosage Selections, Cancella- flashing dosage symbol ( ) starts lighting tion or Use of Powder Deter- up continuously. gent g. It indicates that the compartments are filled successfully and the detergent drawer is in its place. Liquid detergent cannot be selected in some of the programs.
5.6.3 Detergent and/or Softener Liquid detergent and softener dosing symbols become active or inactive according to the program selected on Running Out the screen. When the detergent or the softener put in- First position on the display means liquid deter- side the detergent drawer finishes, the gent is active, softener is on.
It may be necessary to Powder and liquid deter- pre-treat the stains or per- gents recommended for form prewash. colours can be used at Prefer liquid deter- dosages recommended Liquid detergents Powder and liquid deter- gents produced for heavily soiled clothes. suitable for colours gents recommended for for delicate...
Page 24
Please read Installation section of You can see the washing duration the manual before first use. on the display of your machine while The auxiliary functions in the table selecting a programme. Depending may vary according to the model of on the amount of laundry you have your machine.
into the wash cycle, depending on the load 6.4 Programme Selection and temperature selection. In certain pro- a. Determine the programme suitable for the grammes, spraying system will be activated type, quantity and soiling level of the at the beginning of the cycle. The spraying laundry in accordance with "Programme system starts within 3 to 10 minutes in these and consumption table".
Page 26
• WoolProtect / Hand Wash • Supreme Refresh Use to wash your woollen/delicate laundry. Use this programme to reduce the creases Select the appropriate temperature comply- and ironing times of a small amount of un- ing with the tag of your clothes. Your laundry spotted cotton, synthetic or mixed laundry.
Page 27
• Mini / Mini 14‘ The maximum washing temperature in Auto- matic programme depending on the soiling Use this programme to wash your lightly level and laundry type is 60ºC. Washing per- soiled or unspotted cotton clothes in a short formance may not be at the desired level for time but not for towels or heavy cottons.
Whiz application to select a programme from You can also change the temperature after the predetermined programme set, and then the washing starts. This change can be change and use it. made if the only washing steps allow it. If you want to use HomeWhiz feature If you scroll to cold wash option and and Remote Control function, you press Temperature Adjustment but-...
If you want to drain the water at the end of When an auxiliary function button the programme without spinning, use No that cannot be selected with the cur- Spin function. rent programme is pressed, the washing machine will make a warn- No change can be made in pro- ing sound.
the LED will turn off and you will reach the • Remote Control appropriate programme duration for your You can use this auxiliary function key to normally soiled laundry. When you press the connect your product to smart devices. For same button a second time, the fast LED will detailed information, see HomeWhiz Func- light up, the time will decrease a little and it...
To activate the child lock: Press and hold the related auxiliary function button for 3 seconds. After the countdown as “3-2-1" on the display is over, Child Lock symbol appears on the display. When this warning is displayed, you can release the •...
maining time to complete the programme after your programme starts is shown in hours and minutes as in the 01:30 example. Programme duration may differ from the values in section "Programme and consumption table" depending When you have activated the End on the water pressure, water hard- Time function, do not add liquid de- ness and temperature, ambient tem-...
If no programme is started or no button is pressed within 10 minutes during programme selection pro- cess, the product will automatically turn off. Display and all indicators turn off. If you press On / Off button, the de- fault selected programme informa- tion is displayed.
If the water level in the machine is not suit- 6.13 Cancelling the Programme able when you press Start/Pause button, the When the machine is turn on and off the pro- door lock cannot be deactivated and the gramme gets cancelled. Press and hold On/ door lock icon on the display remains on.
In order to use the Bluetooth feature of your 6.15.1 HomeWhiz Setup machine, you must download HomeWhiz In order for the application to run, a connec- application from the application store of your tion between your appliance and the Home- smart appliance.
e. Wait until the installation is complete. When setup is complete, give your wash- ing machine a name. Now, you can tap and see the product you have added in the HomeWhiz Application. Your washing machine will automat- ically turn off if you cannot realize the setup successfully within 5 minutes.
bluetooth connection. If the symbol is flash- 6.15.3 Deleting the HomeWhiz Ac- ing, the product is trying to connect. If the count Match symbol is off, you have no connection. Follow the following steps in order to delete a washing machine previously matched with When the bluetooth connection is on someone else’s account.
If the Remote Control function is Off, all the a. Check whether your smart device is con- operations are handled on the washing ma- nected to the relevant home network. chine and only status follow-up is allowed on b. Restart the product application. the application.
Page 39
have done incorrect loading (for example, if you have placed detergent or softener in the detergent tank), • If a different brand of detergent or softener will be added, • If a washing agent with different specifica- tions (e.g. if detergent is added for col- oured ones when there is detergent in the tank for whites) is added, •...
h. After the completion of the washing pro- We recommend you to wipe the door gasket cess, the cover is inserted to the drawer. with a dry and clean cloth at the end of the Make sure that all guides are in place. If programme.
b. Open the filter cover. 7.5 Draining Remaining Water and Cleaning the Pump Filter The filter system in your product prevents solid items such as buttons, coins and fabric fibres clogging the pump impeller during draining of washing water. Thus, the water will be drained without any problem and the service life of the pump will extend.
Page 42
• It may be difficult to close the loading door • Excessive laundry is loaded in the product. in case of excessive loading. >>> Reduce >>> Take out some of the laundry from the amount of laundry and make sure that the product or distribute the load by hand the loading door is closed properly.
Page 43
pull down the emergency handle posi- Programme duration does not count- tioned at the rear side of the said cap. See down. (*) Loading Door Lock [} 33] • There is unbalanced load in the product. >>> Automatic unbalanced load detection Washing takes longer than specified in system is activated due to the unbalanced the user manual.
Page 44
Washing performance is poor: Stains • A higher temperature was selected. >>> persist or the laundry is not whitened. Select the proper programme and temper- (**) ature according to the type and soiling de- gree of the laundry. • Insufficient amount of detergent is used. >>>...
Page 45
this detergent during rinsing or softener • Detergent was stored under improper step. Wash and clean the drawer with hot conditions. >>> Store detergent in a water. Put the detergent in the correct closed and dry location. Do not store in compartment.
Check the HomeWhiz section for the relevant troubleshooting information. 9 DISCLAIMER / WARNING Some (simple) failures can be adequately Repair and repair attempts by end-users for handled by the end-user without any safety parts not included in such list and/or not fol- issue or unsafe use arising, provided that lowing the instructions in the user manuals they are carried out within the limits and in...