Advertisement
Available languages
Available languages
Step7
Setthesmoke stack ontopofthecabinet
andlineitupwiththematching holes.
Insert three M5X16mmboltsthrough
smoke stack base andintocabinet. Secure
withthree M5mmnuts.
Step 8
Line up the side handle with the matching
holes on each side of the cabinet as
shown. The handles must be positioned
upright with the bolt holes on the bottom as
shown. Insert two M5 X 16 mm bolts and
gaskets from the outside and thread into
the holes in the side of the cabinet as
illustrated. Tighten securely. Complete
steps for both sides of the cabinet
assembly.
Step 9
Insert the wood chip box rack into the
bottom of the smoker. The feet of the rack
sit in the four indentations
in the bottom.
Step 10
Set the wood chip box onto the rack. Make
sure it is seated properly and securely in
the center of the rack. Place the lid on the
wood chip box.
9
Advertisement
