Table of Contents
Advertisement
To
save
a tape
permanently
To prev_lt a tape from being accidentally
recorded
over, break offthe cassette tab from side A or B as
illustlated.
Break off the
cassette tab
\
If you later want to reuse the tape for recording,
covel
the broken
tab with adhesive
tape.
Before
placing
a cassette
in the
tape
deck
Take up any slack in the tape. Othel_vise
the tape may
get entangled
in the parts of the tape deck and become
damaged.
When
using
a tape
longer
than
90
minutes
The tape is ve W elastic. Do not change the tape
operations
such as play, stop, and fast-winding
frequently.
The tape may get entangled
in the tape
deck.
Cleaning
the
tape
heads
Clean _e tape heads after evm T 10 hours of use Be
sme to clean the tape hea& before you strut an
important
recording
or after playing
an old tape Use a
separately
sold dry-type
or wet-type
cleaning
cassette
For details, refer to the instructions
of the cleaning
cassette.
Demagnetizing
the
tape
heads
Dema_letize
the tape heads and _e metal parts that
have contact with the tape after every 20 to 30 hours of
use with a separately
sold demagnetizing
cassette.
For
details, refm to the instructions
of the demagnetizing
cassette.
Main unit (HCD-HPX10W/HCD-HPX9/
HCD-HPX7)
Amplifier section
For the United States model
AUDIO POWER SPECIFICATIONS
HCD-HPXI0W
POWER OUTPUT
AND TOTAL HARMONIC
DISTORTION:
With d-ohm loads, both channels
driven, from
120
10,000 Hz: rated 55 watts per channel
minimum
RMS power, with no more than 10%
total harmonic
distortion
from 250 milliwatts
to
rated output.
HCD-HPX9
POWER OUTPUT
AND TOTAL HARMONIC
DISTORTION:
With d-ohm loads, both channels
driven, from
120
10,000 Hz: rated 75 watts per channel
nlininmm
RMS power, with no more than 10%
total harmonic
distortion
from 250 milliwatts
to
rated output.
HCD-HPXIOW
for CMT-HPXl0W
DIN powm output
0ated):
50 + 50 W
(6 ohms at 1 kHz, DIN)
Continuous
RIMS power output (refmence):
60+60W
(6 ohms at 1 kHz, 10%
THD)
Music power output (reference):
100 + 100 W
HCD-HPX9
for CMT-HPX9
North Ameiican
model:
Continuous
RIMS powm output (refmence):
80+80W
(6 ohms at 1 kHz, 10%
THD)
Other models:
The tbllowing
measmed
at AC 240 V AC 220 V or AC
12O V
DIN power output
(rated):
53 + 53 W
(6 ohms at 1 kHz, DIN)
Contim_ous
RIMS powm output (refmence):
70+70W
(6 ohms at 1 kHz, 10%
THD)
O
K
8"
o
continued
31GB
Advertisement
Table of Contents
