Table of Contents
Advertisement
8
Spare parts
8.1 Orders for spare parts
General
In addition to the exact part designation, please specify the machine type and the serial
number in all orders for spare parts.
The type and serial number can be found on the nameplate. The serial number is also
stamped on the end face of the shaft end on the drive end.
The part designation should be identical to the designation stated in the list of spare parts
and specified together with the appropriate part number.
Example: End shield, D-end (Part 5.00)
See "Nameplate" section for the motor type and serial number.
Commercially available, standard components can be used, but ensure that they have the
same type of construction, dimensions, strength class etc..
When replacing rolling-contact bearings, in addition to the bearing identification code, the
replacement code for the bearing version is required. Both codes are specified on the
lubrication instruction plate and in the motor documentation, or can also be taken from the
installed bearings.
[ID: 382]
8.2 Spare parts 1PH7
Spare parts
Spare part no.
3.10
3.40
3.41
3.47
3.60
SIEMENS AG, 1PH718 A5E00215729A
Operating Instructions - Three-phase induction motor - AH 180
V 2.0
Description
Gamma ring
Deep-groove ball bearings (floating bearing)
Cylindrical-roller bearing
Self-aligning washer
Inner bearing cap
8
8-1
Advertisement
Table of Contents
