Summary of Contents for ANTAI ANTAISOLAR Series
- Page 1 Always be your solar support www.antaisolar.com ANTAI Installation Manual Pitched Roof Solution (Solar mounting system)
-
Page 2: Table Of Contents
CONTENTS General Introduction……………………………………………………………………………………………………………..……..…2 Technical Specification …………………………………………………………………………………………………………..….… 3 Safety and Installer Responsibilities …………………………………….…………………………………………..….……4 Components List………………………………………………………………………………………….………………………………….…5 Before Installing…………………………………………………………………………………………….……………………….….……6 Receipt of Goods………………………………………………………………………………………………………………………….……6 Tools Required for Installation……………………………………………………………………………………………………….…6 Installation Planning……………………………………………………………………………………………………………….………7 Determining Wind Terrain Category…………………………………………………………………………………………..……7 Determining Wind Region…………………………………………………………………………………………………………………8 Planning the Module Area…………………………………………………………………………………………………………………9 Determine the Height of The Installation Site………………………………………………………………………….……10 etermine Roof Slope………………………………………………………………………………………………………………..………10 Determine the Maximum Rail Support Spacing……………………………………………………………………..……..10 Installation Instruction………………………………………………………………………………………………………….……..10... -
Page 3: Technical Specification
ANTAISOLAR features series of highly engineered new innovative product, designed with experienced engineers to the speed of installation. ANTAISOLAR pitched roof solar mounting system is backed by a 10-year warranty and is compliant with AS/NZS1170.2.2011(R2016) Benefits of ANTAISOLAR/ANTAI Pitched Roof Mounting System ● Easy Installation ● Diversified Application ● High Accuracy ●... - Page 4 Complies with Australian/New Zealand Standard on Wind Actions, AS/NZS1170.2.2011(R2016) ⚫ 10 years limited warranty backed up by parent company Antai Aluminum ⚫ Material Tensile strength...
-
Page 5: Safety And Installer Responsibilities
SAFETY AND INSTALLER RESPONSIBILITIES Handling and Installing ANTAISOLAR It is critically important that safety practices are observed when installing Do not throw or roughly handle any ANTAISOLAR components. ⚫ Do not bring ANTAISOLAR system into contact with sharp or heavy objects. ⚫... -
Page 6: Components List
COMPONENTS LIST Overview of system components Part name Picture Part name Picture Rail VI TYN-355 Rail splice Rail clamp L Bracket (L connector) (L Foot) Inter Clamp End Clamp (with T-module) (with T-module) Hexagon socket bolt Tile Roof hook M8*30/45/50/55/6 Klip-Lok 700 Klip-Lok 406 Standing Seam... -
Page 7: Before Installing
BEFORE INSTALLING Receipt of goods Check that the ANTAISOLAR/ANTAI equipment is undamaged and that the order is complete. Check for correct quantities of the items. Tools required for installation 6 mm Allen key or hexagonal driver bit. If using a 6mm driver bit, make sure the cordless... -
Page 8: Installation Instruction
INSTALLATION INSTRUCTION 1. INSTALL FOUNDATION TO ROOFTOP A. Installation of L-bracket on Metal Roof Determine the positions of the L-bracket according to your plans. then, Fix the L bracket (together with Rubber Pad) to the rafter using SUS 410 Screw, fix other L brackets to the rafter according to your plans. - Page 9 C. Installation of Tile Hook on Tile Roof Remove the roof tiles at the marked positions or simply lift them up slightly then input the roof hook to the wooden beam. Fix the roof hooks with 3x self-tapping screws. Minimum 2 pcs Cover the hooks by the removed tile Pitched roof mount installation manual –...
- Page 10 Connect the roof hook with the rail. a. Insert the tilt-in module into the side channel of the rail as the step 9 shown. b. Adjust the rail to be level. c. Fasten the bolt. Note: If necessary, use an angle grinder or hammer to cut a concavity in the tile that covers the roof hook at the point where the roof hook comes...
- Page 11 4. Place the solar module on the rails, slide the end clamp tightly against the solar module and fasten tightly using the Allen bolt (recommended torque is 8 Nm) 5. Slide the pre-assembled inter-module clamp into the rails from above, place it firmly against the module and fasten loosely (approx.
- Page 12 7 to 10. 10.Antai rail grounding system * The pictures shown above are for illustration purpose only, all installation should comply with local standards Pitched roof mount installation manual – Version 2018 1.0 to AS/NZS1170.2.2011(R2016)
Need help?
Do you have a question about the ANTAISOLAR Series and is the answer not in the manual?
Questions and answers