SPECIFICATIONS Temperature Range: 0°C – 50°C or 32°F – 122°F Time Format: 12 & 24HR Screen Size: 52 x 52mm Battery: 3 x AAA (not included) Standby Time: 90 – 150 days Dimensions: 78 x 78 x 78mm Weight:...
Page 6
CONTROLS 1. Light 1. Light 2. Up 5. Alarm 3. Down 4. Set 1. Light Press to turn LED light on. Tapping the top of the clock can also turn on the LED light. The light will illuminate for a few seconds before turning off.
Page 7
CONTROLS continued... 2. Up Press to increase value. In Time view tap to switch between 12 & 24HR time. In Alarm view press to turn alarm and snooze on. When the alarm is sounding, press to snooze (if snooze is activated). 3.
OPERATING INSTRUCTIONS Setting Time & Date Insert 3 x AAA batteries. Ensure the unit is powered on and in normal display mode. Press “Set” to activate setting of time and date. Adjust the values by pressing the “Up” or “Down” button.
Page 9
OPERATING INSTRUCTIONS continued... To activate the alarm, press the “UP” or “DOWN” button till you see a small “Bell” icon onscreen. To activate snooze, press the “UP” or “DOWN” button till you see a small “Zz” icon onscreen. Alarm will ring for 1 minute once the set time has been reached.
TROUBLESHOOTING No Power: Check batteries and replace as required. The Alarm keeps sounding: If you have a snooze alarm set as indicated by the “Zz” icon onscreen, then the alarm will activate every interval the snooze duration has been set e.g., if your snooze duration is set as 15, then the alarm will sound every 15 minutes after the initial alarm until the “Zz”...
Page 11
Thank you for your purchase! Laser Corporation is 100% Australian owned & operated. To get the most out of your product please read the user manual carefully and keep for future use. For specific information relating to your product such as Spare Parts, FAQs, Warranty claims, and more, please scan the following QR code:...
Need help?
Do you have a question about the TT-ACLED-494 and is the answer not in the manual?
Questions and answers