Intended Use; Operation; Playing Audio - DeWalt DCR009 Original Instructions Manual

Intended Use

This D WALT Bluetooth® speaker is designed to play/stream
e
audio via a wireless Bluetooth® connection to a mobile phone
or other audio device. Use the speaker exclusively as described
in this instruction manual. Any other use is considered improper
intended use and can lead to damage to property or even
personal injury.
DO nOT use under wet conditions or in the presence of
flammable liquids or gases.
Do not let children come into contact with the unit. Supervision
is required when inexperienced operators use this speaker.
Young children and the infirm. This speaker is not
•
intended for use by young children or infirm persons
without supervision.
• This speaker is not intended for use by persons (including
children) suffering from diminished physical, sensory or
mental abilities; lack of experience, knowledge or skills
unless they are supervised by a person responsible for their
safety. Children should never be left alone with this speaker.

OPERATION

Button Functions (Fig. A)
Power Button
• To turn the speaker on or off, press and hold the power
button until you hear a sequence of tones from
1
the speaker.
• When the speaker is on, momentarily press the power
button 1 and the speaker will say the percentage of charge
remaining in the battery.
• If the speaker does not respond when buttons are pressed,
press and hold the power button
reboot the speaker.
Play/Pause Button
When audio device connected via Bluetooth®: Press the
play/pause button 5 to begin playing a selection from the
audio device.
• Press the play/pause button
again to resume play.
• To advance to the next track, press the play/
pause button 5 twice quickly.
• To skip to previous track, press the play/pause button
times quickly.
Volume Adjustment Buttons
The volume buttons ,
2 3
volume on the speaker.
• The volume will increase or decrease one level with a quick
press of either volume buttons
• The volume will increase continuously with a long press of
either volume buttons

Playing Audio

Audio can be played through the speaker via a wireless Bluetooth®
connection to a compatible Bluetooth® audio device.
1 for ten seconds to
5 again to pause play. Press
can be used to increase or decrease
2 , 3 .
, .
2 3
Pairing Speaker with a Bluetooth® Audio Device
(Fig. A)
1. Place the speaker and the Bluetooth® audio device within
3 ft. (1 m) of each other.
2. Turn on the speaker by pressing and holding the power
button 1
Bluetooth® status indicator LED
single blink.
3. Be sure the Bluetooth® audio device has Bluetooth® turned
on. (Please consult your device's instruction manual for
specific pairing instructions.)
4. Press the Bluetooth® button
5. The blue Bluetooth® status indicator LED
continuously double blink and you will hear tones from the
speaker indicating the speaker is in pair mode.
6. Select D WALT DCR009 on your device and confirm pairing.
e
7. Once pairing is successful, the Bluetooth® status indicator
LED will remain illuminated blue and you will hear a tone
4
from the speaker.
8. The speaker will now play audio from your device.
nOTE: Audio output power: 1x5W.
Blink Patterns
Continuously Single Blinks
Continuously Double Blinks
Solid light
No light
Connecting a Previously Paired Bluetooth® Audio Device
If a Bluetooth® device has been previously paired to the
speaker, it should automatically reconnect when the speaker
is powered on.
nOTE: The Bluetooth® audio device must have Bluetooth®
turned on to automatically pair.
1. If connection does not occur and you are unable to stream
audio, please follow the instructions for Pairing Speaker
with a Bluetooth® Audio Device.
stereo Pairing with Two speakers
1. On both speakers, simultaneously press and hold the
three
5
Bluetooth® button
2. Speakers will say "left channel" or "right channel" to indicate
that pairing was successful.
3. The Bluetooth® status indicator LED
left channel speaker and the Bluetooth® status indicator
LED will not be illuminated on right channel speaker.
4
Timeout Functionality (Fig. A)
To conserve battery life, the speaker is designed to power off
automatically after fifteen minutes of inactivity. This inactivity
could be due to the device being unpaired for fifteen minutes or
the Bluetooth® connection being broken for the same period of
time. If the speaker powers off due to inactivity of any kind, refer
to Connecting a Previously Paired Bluetooth® Audio Device.
until you hear a sequence of tones. The
4 will continuously
6 on the speaker.
Bluetooth® status indicator lED
status/Mode
Speaker Bluetooth® is on.
Speaker is in pairing mode and discoverable
by your device.
Speaker is connected with a device.
Speaker has timed out and/or is off.
6 for three seconds.
4
English
4 will
will be blue on the
5