Advertisement
Controls and indicators
Numbers in circles correspond to the diagram, symbols in brackets correspond to front panel indications.
@
o
°@
SET
araaT eae Id
(BGs be od]
@
@
8
680
@
@
@ POWER switch
@ Memory key
Press to turn the power
on.
Pressing again turns the
Used to store the desired tunes for memory play.
power off.
in the stop mode, select the desired tunes using the SKIP
(kt, BI) keys and then press the MEMORY
key. The
@ Disc tray
M-READ indicator lights to show that the program tune is
This
will
be
opened
or
closed
by
pressing
the
stored in memory.
OPEN/CLOSE (4) key.
Place a disc on this tray with its label surface up.
@
MANUAL SEARCH keys (<<, p>)
When this key is pressed, the PLAY indicator lights and
the play starts. When it is pressed again, the PAUSE in-
dicator lights and the unit enters the pause mode.
When the key is pressed with the tray opened, the tray is
closed and then the play starts after the disc information
(TOC) is read out. If the tunes are programmed using the
@ \-READ key
MEMORY key, the memory play will be started.
will be closed.
e After the tray is closed, the disc information (TOC = Table
Of Contents) will be read out and then the unit will enter
the stop mode automatically.
Press to recall the memory contents for checking: the
M-READ indicator lights and the memory contents are
@
STOP key (BB)
displayed every three seconds automatically.
When this key is pressed during play, the play stops.
C5] REPEAT key
Press this key to play the disc repeatedly.
The
repeat
function
will
be
cancelled
pressing
the
REPEAT key again.
Advertisement
