Advertisement
Quick Links
STEREO SYSTEM RACK
ORC-5020/5520©
ASSEMBLY INSTRUCTIONS _
KENWOOD
KENWOOD
CORPORATION
©@PRINTED IN U.S.A. B61-0519-00(K)(TCA)
R258
IMPORTANT:
PO
Notes on Assembling
¢ Before operating your new KENWOOD
product, read through this assem-
¢ During assembling, be sure to verify the numbers stamped on the boards.
bly manual carefully to get the most out of it.
e Mount the rear panel after assembling the side panel on the bottom shelf
* Save this assembly instructions.
at a right angle.
;
F
_
@ When mounting the top shelf and kick plate on the side panel, use glue
Before Assembling
for adhesive. Be sure to remove any excess glue before it dries.
¢ If the amplifier wobbles when its key switches are pressed, insert a wooden
°B
h
tI
ted
for before disposing
of the
Sere ee Secs Mie Bil Dante nt ag cOUMegiOCRe
ae
dowel into the hole on the side panel and fix the rear of the amplifier.
packing case.
¢ A Phillips screwdriver and a mallet are required for assembling.
Handling
Precautions
* Be carefull not to damage the floor and rack.
g
« Tempered glass is used for the glass doors for providing sufficient strength.
However,
pay attention not to apply excessive force or to scratch the
doors. Cracking or breaking of the glass may occur.
® When moving the cabinet, remove all the components from the rack be-
fore carrying the cabinet. Also do not grasp the top shelf when carrying.
© To allow head radiation from the components, leave a space of 4 inches
between the cabinet and wall.
* Do not place the cabinet in a location subject to direct sunlight or near
a heater, an air-conditioner, or a place with high humidity.
IMPORTANT SAFEGUARDS .
A eee : Read this page carefully to keep your safety.
~~"
>
Please read all of the safety and operating instructions before operating this unit.
4. Impact — Avoid placing the unit on an unstable surface. Install iton a horizontal
For ies
(Its, follow all warnings placed on the unit and adhere to the operating,
surface not subject to excessive dirt or vibrations.
and use .__ Uetions. These safety and operating instructions should be retained for.
_ _
:
future reverence.
1. Suffocation — After taking the unit out of the polyethylene bag, be sure to di-
spose of the polyethylene bag out of the reach of children. Otherwise, they may
play with the bag, which could cause hazard of suffocation.
5. Modification — Do not attempt to open or modify the unit, for this could cause
fire hazard or malfunction.
2. Water and moisture — Do not place a liquid container, such as a vase and water
basin, on the unit. Also avoid installing the unit in a place subject to dampness.
6. Cleaning — Do not use thinner, benzine or alcohol. When cleaning the unit, wipe
with a soft, dry cloth.
3. Heat — Do not install the unit near a source of heat, such as a heater, or under
direct sunlight.
7. Abnormal smell — In the event the unit generates smoke or abnormal smell, im-
mediately switch the power OFF and unplug the power cord. After this, please
contact your dealer or nearest service station as soon as possible.
POWER OFF!
Advertisement
