Philips AWH1006/51 User Manual page 10

● Fixed water heater：Lift the water heater and insert the installation bracket into the installation holes on its back.
Then, use cross countersunk self-tapping screws to securely fasten and �x it. Only after ensuring the installation is �rm,
you can release your grip to prevent it from falling.
● Accessories installation: Refer to (Figure E) for connections.
Hot water outlet
CAUTION
● A sealing ring must be used at the pipe joint, and a valve must be installed at the water inlet pipe.
● The inlet pipe has a built �lter screen, pay attention to check when connecting the pipe to prevent loose and leak
installation.
233mm
Gasket
Hit screw
Hit screw
Machine
Figure D
Gasket
Flow valve
Gasket
Cooling water inlet
Angle valve
Figure E
EN 7
Leakage protection switch
Power cord