Inserting The Active Airclean Filters; Using The Appliance - Miele KF2811SF Operating And Installation Instructions

Fridge-freezer combination
Hide thumbs Also See for KF2811SF:
Table of Contents

Advertisement

Before first use

Inserting the Active AirClean filters

Your refrigeration appliance is equipped
with 2 Active AirClean filters which neu-
tralize unpleasant odors in the Fridge
Zone.
The holder for the Active AirClean filters
is located under each of the shelves in
the Fridge Zone.
 To remove the holder for the Active
AirClean filters, press against the re-
tainers on both sides of the holder
from the rear and pull the holder
downwards diagonally from the shelf.
 Insert the two Active AirClean filters
supplied with the surrounding edge
pointing downwards into the holder.
 To replace the holder, press against
the retainers on both sides from the
rear and, using the retainers, clamp it
into the gap on the shelf from below.
66

Using the appliance

The touch display can be scratched
by pointed or sharp objects, e.g.,
pens.
Only touch the display with your fin-
gers.
If your fingers are cold, the touch
display may not react.
39
39
°F
The symbols underneath the tempera-
ture display can be selected directly by
touch; the symbols and text in or above
the temperature display can only be
displayed.
... in settings mode 
 Touch the symbol  to open settings
mode.
 Use the arrow buttons  and  to
select the function whose settings
you wish to adjust.
 Confirm your selection with OK.
 Adjust the settings using either the
arrow buttons  and  or sensors 
and .
 Confirm your selection with OK.
The setting with the colored back-
ground is always the selected setting;
it can be confirmed directly with OK.
0
°F
°F

Advertisement

Table of Contents
loading

Table of Contents