Table of Contents
Advertisement
Chapter 2 Useful Features
Menu
> Clear Configuration
Delete All Array Configurations
Delete configuration metadata on all
physical drives
Array Configuration
> Create Array
RAID Level
Logical Drive Label
Stripe Size /Full Stripe Size
Size
Unit Size
Acceleration Method
82
Default Value
256KiB/256KiB
HPE SSD Smart
Path
Express5800/R120h-1M, R120h-2M (3rd-Gen) Maintenance Guide
2. RAID System Configuration
Descriptions
Delete all the array present in the
controller and the data present in the
arrays will be lost.
Delete RAID metadata on the drives which
are not part of array.
RAID Level
Enter Alphabets and Numbers
Strip size is the amount of data that is
stored on each physical drive in the array.
The full stripe size is the amount of data
that the controller can
read or write simultaneously on all the
drives in the array. For RAID levels that
support fault tolerance through parity, the
parity information is calculated one full
strip size at a time.
Enter the value in decimal. The minimum
RAID size is 16 MiB.
Logical Drive Unit Size (MiB/GiB/TiB)
Logical drive acceleration method. Only
SSD can select it. For HDD, the value is
"None".
Advertisement
Table of Contents
