Table of Contents
Advertisement
bs
cae
Rd Ne Dl
Playing Tracks in the
Desired Order
(programme play)
You can programme up to 24 tracks to play
in any order you choose. You do this by
designating the tracks in the order you
want them to play.
POWER—ON
Numeric
buttons
CHECK
CLEAR
1 Press PROGRAM.
"PROGRAM" appears in the display.
2 Press Md << or PPI
to choose a
track.
The track number, the playing order and
the total playing time appear. If you
want to choose this track, go to the next
step. If not, press Kd <4 or PP PPI
again to choose another track.
Track number
Playing order
Total playing time
3 Press PROGRAM.
The chosen track number lights up in
the music calendar. If the track number
disappears before you press
PROGRAM, go back to step 2.
Note
If "--.-" appears instead of the total
playing time during programming , this
means you have programmed 21 tracks
or more. This also means the total time
has exceeded 100 minutes.
4 Repeat steps 2 and 3 to programme the
remaining tracks in the order you want
' them to play.
5 Press D>.
All the tracks play in the order you
chose.
To programme using the remote
commander
1 Set the TUNER/EQ/CD selector to CD.
2 Press PROGRAM.
3 Press the numeric buttons in the order
you want them to play.
4 Press CD >.
Playing starts.
To
Press
Check the
CHECK
programme
repeatedly*
Programme apause
[l**
Stop play
a
Cancel the
CONTINUE***
programme play
Erase a track from
CLEAR in stop
the end
mode
Erase a specific track
so the number of
the track lights up,
and press CLEAR.
Erase the entire
programme
@ once in stop
mode and twice
while playing
*
After the last track appeared "End"
appears in the display.
** "P" appears and the total playing time is
reset to 0.00.
*™ The programme is erased.
To change the order of programmed
tracks
Erase the entire programme and create a
new one.
To check the total remaining time of
the programmed tracks
Use the button on the remote commander
to do this operation.
1 Press TIME once to see the remaining
time of the track being played.
CHECK repeatedly
2 Press TIME again to see the remaining
playing time of the whole programme.
If you have inserted a pause, the display
shows the remaining time until the
pause.
3 Press TIME once more to return to the
initial display.
8
RE
a
ee]
Playing Tracks
Repeatedly (repeat
play)
You can choose between two different
repeat play modes. One repeats all the
tracks in the current play mode; the other
repeats a single track. Use the button on the
remote commander to do this operation.
POWER-—+ON
Repeating all the tracks (in any play
mode)
Press REPEAT once while playing so that
"REPEAT" appears in the display.
\
<
}
ou NB oo on
Repeating a single track (in normal
play and delete play)
Press REPEAT twice while playing the
desired track so that "REPEAT 1" appears
in the display.
To cancel repeat play
Press REPEAT so that "REPEAT" or
"REPEAT 1" disappears from the display.
Chapter 2 : the CD Player
O By
Advertisement
Table of Contents
