Advertisement
Listening to a CD
1
Press the FUNCTION button until "Cd dISC" appears on the dis-
play.
2
Press the
3
Place a CD on the spindle, label side up.
4
Close the CD compartment by firmly pushing the corner marked
"PUSH CLOSE".
5
Press the
Listening to a cassette tape
1
Press the FUNCTION button until "TAPE" appears on the display.
2
Press the
compartment.
3
Load a cassette into the cassette compartment
with the side to be played facing toward you.
4
Close the cassette compartment.
5
Press the
If trouble occurs
When this product is subjected to strong external interference (mechani-
cal shock, excessive static electricity, abnormal supply voltage due to
lightning, etc.) or if it is operated incorrectly, it may malfunction.
If such a problem occurs, do the following:
1 Set the unit to the stand-by mode and turn the power on again.
2 If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
Note:
If neither operation above restores the unit, clear all the memory by re-
setting it.
Downloaded from:
http://www.usersmanualguide.com/
CD EJECT button to open the CD compartment.
button to start playback from track 1.
button to open the cassette
button to start playback.
Listening to the radio
1
Press the FUNCTION button until "FM" or "AM" appears on the
display.
2
Press the TUNING (
or
) button to tune in to the desired sta-
tion.
When the TUNING button is pressed for more than 0.5 seconds, scan-
ning will start automatically and the tuner will stop at the first receivable
broadcast station.
To receive an FM stereo transmission:
Press the FUNCTION button to display the "ST" indicator.
"
" will appear when an FM broadcast is in stereo.
Clearing all the memory (reset)
1 Press the ON/STAND-BY button to enter the power stand-by
mode.
2 Whilst pressing down the MEMORY/SET button and the CLEAR
button, press the ON/STAND-BY button until "CL" appears.
Caution:
This operation will erase all data stored in memory including clock, timer
settings, tuner preset, and CD programme.
Maintenance
Cleaning the CD pickup lens
Do not touch the laser pickup lens. If finger-
prints or dust accumulate on the pickup,
clean it gently with a dry cotton swab.
Cleaning the tape-handling parts
•
Dirty heads, capstan or pinch roller can cause poor sound and tape
jams. Clean these parts with a cotton swab moistened with commer-
cial head/pinch roller cleaner or isopropyl alcohol.
•
When cleaning the heads, pinch roller, etc., unplug the unit which con-
tains high voltages.
A
B
•
After long use, the deck's heads and capstan may become magne-
tised, causing poor sound. Demagnetise these parts once every 30
hours of playing/recording time by using a commercial tape head de-
magnetiser. Read the demagnetiser's instructions carefully before use.
FM stereo receiving indicator
FM stereo mode indicator
A Erase head
C
D
B Recording/
Playback head
C Capstan
D Pinch roller
TINSZA015SJZZ
Advertisement
