Table of Contents
Advertisement
Administrator's Guide
Product Security Settings
This chapter explains the security settings of the device.
Introduction of Product Security Features
This printer allows you to restrict access for users other than the administrator.
You need to log in with an administrator password to use all the functions. The administrator password has already
been configured.
Important:
c
We recommend changing the administrator password to your own password instead of continuing to use the initial
password after you start using the printer.
Changing the password
"Changing the Administrator Password" on page 31
You can use all the Web Config functions by logging in with an administrator password.
Immediately after purchase, you can use all functions without any restrictions from the printer's control panel
menus. To enable function restrictions, set Lock Setting to On from the menu.
"Enabling the Lock Setting" on page 33
When Lock Setting is set to On, you need to log in with the administrator password to use the restricted functions
on the printer. See the following for instructions on logging in.
"Logging on to the Printer as an Administrator" on page 35
Changing the Administrator Password
The initial administrator password for this printer has already been configured. You can find the initial password
on the label stuck to the location shown in the figure.
Product Security Settings
31
Advertisement
Table of Contents
