What If I Can't Access The Factory Reset Option; Network Connection Reset - Philips 42PFL4765/F8 User Manual

What if I can't access the Factory Reset option?

It is possible for your TV to get into a state where you cannot access the various menus, including the
menu option that lets you perform a factory reset operation. If that happens, you can force the TV to
reset by following these steps.
Models with a RESET button
1. Using a straightened paper clip or ball‐point pen, press and hold the recessed RESET button on
the TV connector panel.
2. Continue to hold the RESET button for approximately 12 seconds.
When the reset cycle completes, the status indicator comes on dim.
3. Release the RESET button. The TV is now powered off.
4. Turn on the TV and proceed through Guided Setup. See Guided Setup.
Models without a RESET button
1. On the TV panel (not the remote) press and hold down the MUTE and POWER buttons.
2. Unplug the TV power, and then plug it in while continuing to hold down the MUTE and POWER
buttons.
3. When you see the startup screen appear on the TV, release the buttons.
4. Turn on the TV and proceed through Guided Setup. See Guided Setup.

Network connection reset

If you want to remove your network connection information without disturbing other settings, navigate
from the Home screen to Settings > System > Advanced systems settings > Network connection reset ,
and then select Reset connection .
When you select this option, the TV removes your wireless network information, including the name of
the connection (its SSID) and your wireless password, if any, and then it restarts. After restarting, your
TV retains all of its other settings and its association with your Roku account.
116