Table of Contents
Advertisement
Note:
Keys not specifically described here are the same as on this unit's front panel.
Since some optional components to be connected for system control are not avail-
These buttons operate optional TOSHIBA's
able in some areas, check their availability at the authorized TOSHIBA service sta-
VCRs. Their operation is the same as for
tion in your area.
the VCR's front panel.
Note that by pointing this remote contro! unit at each REMOTE SENSOR window
TVs and VCRs can be controlled without connection to SYSTEM CONTROL
This button selects bands of optional tuner
These
buttons
switch
POWER
on/off and
TV/VIDEO operation for optional TOSHIBA's
TVs.
¢ This button operates SR-5638 turntable:
L/R Key
Although delay time is normally changed
simultaneously in both left and right chan-
nels, ''both channels',
''left only'', or
"right only'' can be set one after another
by pressing the L/R key.
USER'S PROGRAM
Key
User's program call key. After first press
this key, press one of the keys 1 thru 4
in the row above to call a program.
MEMORY
Key
To store a user's program
in memory,
press this key, then one of the keys 1 thru
4 in the row above.
DSP CONTROL Keys
These keys are used to change parameters
in each mode when using the digital sound
processor.
And by storing changed para-
meters inmemory,
the user's own unique
sound field can be created.
POWER
Switch this unit power on and off (same
as the front panel POWER
switch).
INPUT SELECTOR
mi
CD
TUNER
PHONO
TAPE! TAPEQDAT
Co
CoCo
VCR2
VCRYAUX VOP/COV TV/OBS
C3
Cy) oC)
Ses & &
DoLey
STAOUM
FANTASY THEATER SURROUND onorr
TOSHIBA
REMOTE CONTROL UNIT MODEL AM-1000XBA,
(ST-5528/5538). A/B and TUNING are the
same as on the tuner's front panel.
These buttons operate optional CD player
(XR-9018/9028)
and CD auto changer
(XR-9058). DiSC CHANGE button is used
to select XR-9058''s discs in sequence.
These buttons operate optional tape deck
(PC-5858)
and are the same as on the
PC-5858's front panel.
@ Changing Parameters
@
Press the MODE key to set DSP mode.
@
Change parameter by pressing the DSP
CONTROL
keys.
To store in memory
@
Press the MEMORY key.
@
Press one of the keys 1 thru 4.
This
completes
the
memory
storage
Operation.
To call parameter from memory
e Press the USER'S PROGRAM
key.
e Press one of the keys 1 thru 4.
REAR VOLUME
Press[AJto increase the voiume level of
the
rear
speakers,
and
press
to
decrease the level.
Advertisement
Table of Contents
