Operating The Appliance; Switching The Appliance On; Switching Off And Disconnecting The Appliance; Setting The Temperature Unit - Bosch B36CD50SNS/02 Installation And Using Instructions

Table of Contents

Advertisement

Water filter
After installing a new water filter, for hygiene
Note:
reasons discard the ice cubes produced within the
first 24 hours and dispense water for 5 minutes and
discard.
The water filter supplied filters particles and the taste
of chlorine out of the water, not bacteria or microbes:
Replace the water filter
every 6 months
as soon as the change filter button lights up
if the water flow is visibly reduced
A new water filter is available from our
Note:
customer service, your dealer or on our website.
If you use an external water filtration system, you can
also use the appliance without an internal water filter
To do this, replace the water filter with a bypass filter:
The bypass filter removes coarse particles from
the drinking water and can be cleaned as
required.
The bypass filter can remain in the appliance
permanently and does not need to be changed.
Switch off the change filter alarm as soon as the
change filter button lights up.
~ "Change filter alarm" on page 21
A new bypass filter is available from our
Note:
customer service or on our website.
Change water filter or replace with bypass filter:
Notes
When changing, some water will drip from the
filter. Wipe drips up with a soft cloth.
You can dispose the used filter with your
household garbage.
Reach into the lower recess of the filter cover,
1.
pull forwards slightly and move to the bottom left.
Turn the filter 90° counterclockwise and remove.
2.
Insert the new filter in the filter opening to the
3.
stop and turn 90° clockwise as far as it will go.
Move the filter cover up to the right again and
4.
slide back as far as it will go.
Operating the appliance en-us

1Operating the appliance

S witching the appliance on
O p e r a t i n g t h e a p p l i a n c e
Press ÿ power button.
1.
The appliance begins to cool. The alarm off
button will blink and a warning sound will beep if
the temperature in the freezer compartment is still
too warm.
Press alarm off button.
2.
The warning sound switches off.
Set the required temperature.
3.
~ "Setting the temperature" on page 20
Operating tips
When the appliance has been switched on, it may
take several hours until the set temperatures have
been reached. Do not put in any food until the
selected temperature has been reached.
The fully automatic NoFrost system ensures that
the appliance remains frost-free. Defrosting is not
required.
The front sides of the housing are warmed to
prevent condensation in the area of the door seal.
Switching off and disconnecting the
appliance
Switching off the appliance
Press ÿ power button.
The appliance is no longer cooling.
Disconnecting the appliance
If you are not going to use the appliance for a long
period:
Interrupt the water supply to the appliance.
1.
Take all food out of the appliance.
2.
Press ÿ power button.
3.
The appliance is no longer cooling.
Pull out the power plug or switch off the circuit
4.
breaker.
Remove the water filter, empty the ice cube bin
5.
and clean the appliance.
~ "Cleaning" on page 28
Leave the doors and drawers of the appliance
6.
open.

Setting the temperature unit

You can choose between the units °C and °F:
Press menu button.
1.
Press °C/°F button.
2.
Press Y/X Settings button until settings display
3.
shows °C or °F.
Press menu button.
4.
The setting is saved.
19

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

B36cd seriesB36cd50sns/01

Table of Contents