BT RRE140 Repair Manual page 271

Publication No.
261828-040 2008-08-21
© BT
Date
14. Tighten the screws (c) on the locking ring (d) to 124Nm.
15. Tighten the screws (a) of the bottom bracket to
1.6–2.0 ton mast: 519 Nm (one screw)
2.5 ton mast: 266 Nm (two screws)
16. Unscrew the locking screw (b) and apply Loctite 29320 (Loctite 242
Blue) to the threads.
17. Screw in the locking screw (b) until it makes contact.
18. Finally, tighten the locking screw (b) ¾ of a turn.
19. Connect the hydraulic hoses to the lift cylinders (H1 and H2) and
the free lift cylinder (H3) on the main valve.
20. Connect the hydraulic hoses to the tilt cylinder (A1 and B2).
21. Connect any electric cables for extra functions on the mast.
22. Bleed the hydraulic system - see the section "Hydraulic system,
bleeding".
Repair Manual
Mast/Lift system 7000
Valid from serial number
6051502
b
c
d
RRE140/160/180/200/250
Main mast 1.6-2.5 t (7100)
T-code
815, 816
15 – 15