Table of Contents
Advertisement
2
Recalling a key snapshot
For example, the following procedure recalls the state of the M/E-1 key 3
settings.
1
2
382
Key Snapshots
In the Flexi Pad control block, hold down the [SNAPSHOT] button and
press the key source name display/key snapshot button corresponding to
the register in which you want to save the snapshot.
The key source name display/key snapshot button which you pressed lights
yellow.
Note
If you save a key snapshot in a register for which the button is lit orange or
yellow, the existing contents of the register are overwritten.
In the M/E-1 independent key transition control block, press the [K-SS]
button in the key 3 control block, turning it on.
Press the key source name display/key snapshot button corresponding to
the register you want to recall.
The button you pressed lights yellow, and this recalls the key settings
(excluding the key insertion state (on/off) and key priority).
Advertisement
Table of Contents
