Dimensions For 30" Wall-Mounted Units - Bosch HBL33 Installation Manual

Dimensions for 30"
Wall-Mounted Units
Single Oven 30"
2612"
l (724mm)
2a"
(61 ommy << >
Pot anaag
~ 2ga/a" osse'l :
a "ef Tt
"boy 27 1/16" | :
726mm) | jGo7mm)
it min, 494° (121mm)
max. 38" (964mm)
2378" (606mm)
Le 22" (559mm)
It is good practice, when oven is installed at the end of a
cabinet run, adjacent to a perpendicular wail or cabinet
door, to allow at least 1/4" space between the side of the
oven and the wall/door.
For oven support, install 2x4's extending front to back flush
with the bottom and the side of the opening. The supporting
base must be well secured to the floor/cabinet and level.
Note:
The conduit box must be installed either above or below
the unit. If the conduit box is installed below the unit, a 2"
diameter hole or space is required between the back wall
and the right rear of the 2x4 supports.
The cabinet base must be flat and capable of supporting a
weight of at least 212 Ibs (96 kg).
English 6
Double Oven 30"
212"
s-(724mm)
24° —
(610mm).
|,
|
" :
vos
|
~ (755mm)
518"
sta
(1299mm)
(1314mm)
a
(1264mm)
| min. 44° (121mm.
ol. max.170/4"(43emmn)-
23778" (606mm)
awe )
a
It is good practice, when oven is installed at the end of a
cabinet run, adjacent to a perpendicular wall or cabinet
door, to allow at least 1/4" space between the side of the
oven and the wall/door.
For oven support, install 2x4's extending front to back flush
with the bottom and the side of the opening. The supporting
base must be well secured to the floor/cabinet and level.
Note:
The conduit box must be located above the unit to facilitate
connecting and servicing.
The cabinet base must be flat and capable of supporting a
weight of at least 390 Ibs (177 kg).