Download
Share
Print this page
  1. Manuals
  2. Brands
  3. ML Accessories Manuals
  4. Lighting Equipment
  5. ENM5C
  6. Installation & maintenance manual

ML Accessories ENM5C Installation & Maintenance Manual

Hide thumbs
1
2
3
4
5
6
7
8

Advertisement

Quick Links

Download this manual
INSTALLATION & MAINTENANCE MANUAL
ENM5C

Advertisement

loading
Need help?

Need help?

Do you have a question about the ENM5C and is the answer not in the manual?

Questions and answers

Related Manuals for ML Accessories ENM5C

Summary of Contents for ML Accessories ENM5C

  • Page 1 INSTALLATION & MAINTENANCE MANUAL ENM5C...

  • Page 2: General Instructions

    These instructions should be read carefully and retained after installation by the end user for future reference and maintenance. These instructions should be used to aid installation of the following product: ENM5C   SAFETY • This product must be installed in accordance with the latest edition of the IEE Wiring Regulations (BS7671) and current Building Regulations.
  • Page 3 • A minimum void of 80mm is required to fit the battery and inverter through the cut-out if no access is • A minimum void of 80mm is required to fit the battery and inverter through the cut-out if no access is available from above available from above Fig.
  • Page 4 • Connect the battery and the downlight via plug and socket to the inverter • Place the battery and inverter into the ceiling void ensuring that there is at least 50mm of clearance above and around them • Lift both of the spring clips on the sides of the downlight and push into the ceiling •...

  • Page 5: Warranty

    If this product should fail within its warranty period, it should be returned to the place of purchase for a free of charge replacement. ML Accessories does not accept responsibility for any installation costs associated with the replacement product. Your statutory rights are not affected. ML Accessories reserve...
  • Page 6 TESTING FOR EMERGENCY LUMINAIRES Recommended routine test procedure in accordance with BS5266 • Daily check – check LED charge indicator is illuminated • Monthly functional test - simulate a mains supply failure for approx. 30 seconds by operation of key switch, switching off circuit breaker, or using test button.
  • Page 7 230V 25°C IP20 50Hz SUPPLIED BY: (UK) MANUFACTURER (EU) AUTHORISED REPRESENTATIVE ML ACCESSORIES LTD, SLV LIGHTING GROUP, UNIT E CHILTERN PARK, DAIMLERSTRASSE 21-23, BOSCOMBE ROAD, DUNSTABLE 52531 ÜBACH-PALENBERG, GERMANY LU5 4LT, EMAIL: EPREL@GROUP.SLV.COM WWW.MLACCESSORIES.CO.UK DCDEC22_V1 MADE IN CHINA...
  • Page 8 230V 50Hz, IP20, Class 2, Non-Dim, Non-IC, house, Ta 0~45...