12 System Configuration; Basic Configuration; Time Configuration; Time - advidia M-NVR-32CH User Manual

12 System Configuration

Basic Configuration

1. Click System > Basic.
2. Configure the parameters.
NOTE!
Only admin can set Enable Password.

If Enable Password is not selected, no password is required for local login at system startup.

However, a username and password are still required when you log in after a logout.
Some NVR models support Intelligent Mark. When the NVR and IP camera are both enabled, the

latest areas/lines or VCA data configured for face detection, intrusion detection, and cross line
detection will be displayed on the Preview, Behavior and Alarm windows in real time.
Intelligent mark is displayed on the screen as areas/lines in different colors. Yellow means

areas/lines configured for face detection, intrusion detection, and cross line detection; green means
VCA data has changed but not triggered rules; red means rules are triggered in the configured area
(rules are configured for VCA alarms), and VCA alarm has occurred.
You may also set startup Wizard here by clicking Wizard.

3. Click Apply to save the settings.

Time Configuration

Time

1. Click System > Time > Time.
2. Select the correct time zone, and then set date and time formats and the system time. The
following shows an example.
https://i-pro.com/global/en/surveillance/advidia
72