Save the carton and all packing materials. In the event that a fixture must be returned to the factory, it is important that the fixture be returned in the original factory box and packing. Your shipment includes: Showtec Compact Blinder 2 with a Schuko power cable (1,5 m) User manual Safety Instructions Every person involved with the installation, operation and maintenance of this device has to: ...
Page 4
For adult use only. The device must be installed out of the reach of children. Never leave the unit running unattended. The user is responsible for correct positioning and operating of the Compact Blinder 2. The manufacturer will not accept liability for damages caused by the misuse or incorrect installation of this device.
Compact Blinder 2 Operating Determinations This device is not designed for permanent operation. Consistent operation breaks will ensure that the device will serve you for a long time without defects. The minimum distance between light output and the illuminated surface must be bigger than 1 meter.
Compact Blinder 2 Return Procedure Returned merchandise must be sent prepaid and in the original packing, call tags will not be issued. Package must be clearly labeled with a Return Authorization Number (RMA number). Products returned without an RMA number will be refused. Highlite will not accept the returned goods or any responsibility.
Compact Blinder 2 Description of the device Features The Compact Blinder 2 is a blinder system from Showtec. Input voltage: 240V AC, 50Hz Power consumption: 430W Light source: 2 x GY5.3 120V/250W (not included) Housing: Metal & flame retardant plastic ...
07) Fuse F5L/250V Installation Remove all packing materials from the Showtec Compact Blinder 2. Check if all foam and plastic padding is removed. Connect all cables. Do not supply power before the whole system is set up and connected properly.
Compact Blinder 2 Installing the Lamp The Compact Blinder 2 uses the Osram Projection Bulb ENH GY5.3 lamp, 250W (ordercode 80808O), as manufactured by all popular manufacturers. Use only the appropriate lamp for your unit. Note that, product versions that use other lamps, may be offered in the future. Check your product specification label for information.
04) The electric power supply cables must not show any damages or material fatigue. The Compact Blinder 2 requires almost no maintenance. However, you should keep the unit clean. Otherwise, the fixture’s light output will be significantly reduced. Disconnect the mains power supply, and then wipe the cover with a damp cloth.
05) If you are unable to determine the cause of the problem, do not open the Compact Blinder, as this may damage the unit and the warranty will become void. 06) Return the device to your Showtec dealer. Problem Probable cause(s) Solution •...
Need help?
Do you have a question about the Compact Blinder 2 and is the answer not in the manual?
Questions and answers