Table of Contents
Advertisement
DISASSEM BLY
INSTRUCTIONS
(Continued)
AMPLIFIER P.C.BOARD REMOVAL
1. Remove the Panel Chassis by following the instructions for
it.
7
2. Remove the two black screws (31 and 32) from the rear of
5
:
;
es
.
[|
(eae
the Cabinet Chassis and the four screws (33
36) fastening
a4)
the P.C.Board and unhook the Record Wire (L) from the
Record Lever.
17
18
3. Then, remove the Chassis from the unit by carefully lifting it.
4.
Reassemble in reverse order.
PANEL CHASSIS
REMOVAL
1.
Remove
the
Cover
and
Front
Pane!
by
following
the
instructions for them.
2.
Unsolder the four lead wires of the Meters and the two lead
wires
of Lamp
P.C.Board
from
the Amplifier
P.C.Board.
Take out the flexible wire (I) from the Switch Lever (J).
3.
Detach the Power Switch (K) by removing the two Screws
3. Carefully remove tne P.C.Board by lifting it.
(19 — 20).
4. Reassemble in reverse order.
4. Remove
the five screws
(21 — 25)
fastening
the
Panel
Chassis and the three screws (26 — 28) holding the Switches.
Then, remove the two nuts (30 and31)
holding the Input
POWER
SUPPLY
P.C.BOARD ASSEMBLY
REMOVAL
Level Control.
1.
Remove the Cover by following the instructions for it.
2. Take out the flexible wire (1) from the Bias Switch.
5.
Then, remove the Panel Chassis from the unit.
6.
Reassemble in reverse order.
3.
Unscrew the four screws (37 — 40) fastening the P.C.Board
and remove the P.C.Board by lifting it.
4.
Reassemble in reverse order.
ee
Advertisement
Table of Contents
