Table of Contents
Advertisement
About this Manual
Intended audience
This section describes the organization of this manual and some conventions of
notation used.
This manual is a guide to the PVE-500 editing control unit.
It is intended to be read by persons responsible for the operation of professional
video equipment, for example, at cable television stations and corporate production
facilities. Therefore it assumes that readers will be familiar with the basic concepts
of video editing and have some experience in operating professional video
equipment.
About
this
Manual
Manual organization
The organization of this manual is as follows.
Chapter 1 Outline
Explains the principal features of the unit and optional accessories.
Chapter 2 Names and Functions of Parts
Briefly explains the function of each of the switches, Sones and connectors on
the control and connector panels.
Persons already familiar with professional or broadcast editing equipment can
obtain a general grasp of the unit's capabilities by reading through this chapter.
Chapter 3 Preparations
Covers matters which you need to know before using the unit, such as how to
connect external equipment to this unit in order to configure a complete editing
system, and preparations to make before starting to edit.
Chapter 4 Basic Editing — Cut Edits
Explains how to perform basic cut edits, using one player and one recorder, for
instantaneous switching between program sources.
Chapter 5 Editing with Two Players — A/B Roll Edits
Explains how to perform A/B roll edits in which you can add special effects while
switching between the playback signals of two players, using a video switcher and
an audio mixer connected to this unit.
Chapter 6 Advanced Editing
Explains advanced techniques not covered in previous chapters.
Chapter 7 Managing Edit Data — The Edit Decision List (EDL)
Explains how to save settings made in order to execute an automatic edit, and how
to recall the settings and use them again.
About this Manual
£3 (E)
WU
Advertisement
Table of Contents
