1 : ADMINISTRATOR MENU In the initialization state, it is the experience mode. Enter any password and fingerprint to unlock it, enter the management mode and configure the administrator password, and the experience mode ends. 1. Add User 2. Delete User 3.
Page 3
2 : ENTER TO ADMINISTRATOR MODE Touch the front pad area, the touchpad light is on, press [*] twice in a row to enter the administrator management mode. The first time you enter, you need to configure an administrator first, and you can add it according to the voice prompts.
5 : HOW TO USE 5.1 : NORMAL MODE 5.1.1 : PINCODE UNLOCK Enter pincode and [#] to confirm. 5.1.2 : FINGERPRINT UNLOCK Place the registered fingerprint on the sensor. Once verification is successful, the door will be unlocked. 5.1.3 : RFID TAG UNLOCK Place the registered RFID Tag on the front card reader.
5.4 : EASY SWIPE Swipe your finger from the lock icon to the unlock icon on the indoor panel to unlock indoors, and pull / push to open door. 5.5: AUTOMATICALLY LOCKING DOOR After the door closing sensing tongue is pressed, the main tongue will be automatically released, and the door will be locked automatically.
Need help?
Do you have a question about the smart lock A1 and is the answer not in the manual?
Questions and answers