Checking The Battery Status - Silvercrest SCP 10000B1 Operation And Safety Notes

The current battery status is shown by LED indicator
LED indicator
1 LED flash
1 LED light up, 1 LED flash
2 LED light up, 1 LED flash
3 LED light up, 1 LED flash
4 LED light up
* This is approx percentage of power bank capacity but not
actual measurement.
The required charging time for the power bank depends
on the charging source and its output power. Fully charged
this power bank by using 5 V / 3.0 A charging source ap-
prox. 6.5 hours.
ATTENTION! Do not connect any device to the power
bank for charging while the power bank itself is charging.
Remove the charging cable from the Powerbank when it
is fully charged.

Checking the battery status

You can check the battery status on the LED indicator
anytime.
Lightly press the ON / OFF switch
shows the current battery status of the power bank
approx. 30 seconds in terms of 4 LED indicators
show overall power bank
1 LED light up = 25 %
2 LEDs light up = 50 %
status
1
0‒25 %
25‒50 %
50‒75 %
75‒100 %
100 %
6
Power bank
capacity level*
. The LED indicator
5
capacity.
:
1
1
1
for
6
to
1
GB/IE 27