Nfc - Ayrton argo 6 FX User Manual

11. NFC

When the fixture is powered on, you can use a NFC smartphone with the Ayrton NFC App to
scan the NFC tag area of the fixture to read some of the information or settings inside the
display menu, such as product name, software version, UID, DMX Start Address, Universe,
User Mode, Options, Information, etc. You can also change some of the settings and push to
write inside the fixture menu.
When the fixture is not powered on, you can still use the App to read the NFC info and write the
settings into the NFC tag, the written data will be automatically synchronized into the fixture
menu at next time the fixture is powered on.
NOTE:
•
Before using, make sure there is NFC function on your smartphone and it is activated,
Download and install the Ayrton NFC App;
•
The NFC tag on the fixture is right under the LCD window;
•
The NFC reader area vary on different smartphones, identify the correct area on your
smartphone before scanning the NFC tag on the fixture;
•
When scanning, make sure the NFC reader area of your smartphone close enough to the
LCD window and hold still the smartphone for 3 seconds until reading successfully.
11.1 How to use NFC
First install Ayrton NFC App into your mobile phone and enable NFC function of your mobile.
1) Open the Ayrton NFC App (as shown in Figure 1), tap the button to activate NFC scan
(Figure 2), place the NFC scan area of your mobile phone close to the NFC tag area of the
fixture, it will show the setting and configuration page after reading successfully (Figure 3).
28