Rename Channels; Uninstall Or Reinstall Channels; Rearrange Channels; Manually Update The Channel List - Philips 32PFL7403D User Manual

6�2�1 Fine tune analogue channels
You can manually fine tune analogue channels
when reception is poor.
1. Press MENU on the remote control
and select TV menu > Installation
> Channel installation > Analogue:
manual installation > Fine tune.
2. Press Æ to enter the Fine tune menu.
3. Press Î or ï to adjust the frequency
4. Press Í when done.
5. Select Store current channel to store
the fine tuned channel under the current
channel number.
6. Press Æ to enter.
7. Press OK. Done appears.
8. Press MENU to exit.
6�3

Rename channels

1. Press MENU on the remote control
and select TV menu > Installation >
Channel installation > Rearrange.
2. Press Æ to enter the Rearrange list.
3. Press Î or ï in the Rearrange list to
select the channel you want to rename.
4. Press the red key.
5. Press Í and Æ to select characters or Î
and ï to change the characters. Space,
numbers (0-9) and other special characters
are located between z and A.
6. Press the green key or
Tip
E
Delete all characters by pressing the yellow
key. Delete only the highlighted character by
pressing the blue key.
EN-34
OK to finish.
6�4 Uninstall or reinstall
channels
You can uninstall a stored channel or reinstall
an uninstalled channel.
1. Press MENU on the remote control
and select TV menu > Installation >
Channel installation > Rearrange.
2. Press Æ to enter the Rearrange list.
3. Press Î or ï to select the channel you
want to uninstall or reinstall.
4. Press the green key to uninstall or reinstall
the channel.
5. Press MENU to exit.
6�5

Rearrange channels

1. Press MENU on the remote control
and select TV menu > Installation >
Channel installation > Rearrange.
2. Press Æ to enter the Rearrange list.
3. Press Î or ï to select the channel you
want to rearrange.
4. Press the yellow key to move the channel
up the list. or press the blue key to move
the channel down the list.
5. Press MENU to exit.
6�6 Manually update the channel
list
If your TV is in standby mode, an update is
performed every morning. This update matches
channels stored in your channel list with those
available from your broadcaster. If a channel is
unavailable, it is automatically removed from
the channel list.
In addition to the automatic update, you can
manually update the channel list.