Digital Recording Unit Dru-1; Remote Controller - Kenwood TM-231A Instruction Manual

7
1.
2.
3.
-1-2. Digital Recording Unit DRU-1
Remove the 2 screws securing the Top cover. Gently re-
move the top cover. (Fig. 1)
Attach the three cables from the DRU-1 as shown in Fig.
2.
Gently place the DRU-1 in the transceiver as shown in
Fig. 3. Don't forget to attach the TSU-6 as shown if you
are installing this unit at the same time (Fig. 4). Tighten
the screw.
. Replace the covers and tighten the screws to complete
the installation.
38
7-1-3. Remote Controller RC-10
To operate the transceiver with the RC-10 press and hold
the CALL key on the transceiver and then turn on the POW-
ER switch.
To select the CALL channel when using the RC-10 press
the F key on the RC-10 and then the VFO key.
Please refer to the instructions provided with the RC-10 for
a description of the other RC-10 functions.