How To Replace The Smarc Module Board - Renesas RZ/Five Startup Manual

SMARC EVK of RZ/Five

8.2 How to replace the SMARC Module Board

Please be careful when replacing the board as follows.
1. Remove the four screws.
Note: The screw thread is a special shape, so be careful not to crush the screw thread.
Please recommend to prepare a torx screwdriver which is a "T6" head size.
2. Remove the screw and the board will stand up at an angle. Slide it out.
3. Insert the replacement the board diagonally, then roll the SMARC board parallel to the board and fix it with screws.
R01US0618EJ0101 Rev.1.01
Oct. 31, 2023
Specially shaped screw threads
Linux Start-up Guide
Page 39 of 41